Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000002585O
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: METER / GAUGE / DISPLAY: TRIP SWITCH: INSPECTION; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT TRIP SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (A/B) - 2 (E)

ODO/TRIP switch pressed

Below 1 Ω

ODO/TRIP switch not pressed

10 kΩ or higher

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)

(b) Check the illumination.

(1) Apply auxiliary battery voltage to the trip switch and check that it illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6 (ILL+)

Auxiliary battery negative (-) → Terminal 1 (ILL-)

Illuminates

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)