| Last Modified: 09-02-2025 | 6.11:8.1.0 | Doc ID: RM100000002585L |
| Model Year Start: 2023 | Model: RAV4 | Prod Date Range: [10/2022 - ] |
| Title: METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL; 2023 - 2025 MY RAV4 RAV4 HV [10/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
PROCEDURE
PROCEDURE
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
Click here
![2023 - 2025 MY RAV4 RAV4 HV [10/2022 - ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Click here
3. REMOVE COMBINATION METER ASSEMBLY
(a) for 7 Inch Display:
|
(1) Remove the 4 screws. |
|
(2) Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.
|
Remove in this Direction |
|
(3) Detach the clamp and disconnect the 2 connectors. |
|
(b) for 12.3 Inch display:
|
(1) Remove the 4 screws. |
|
(2) Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.
|
|
Remove in this Direction |
|
(3) Detach the clamp and disconnect the 2 connectors. |
|
|
|