| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM1000000021JTN |
| Model Year Start: 2022 | Model: RAV4 HV | Prod Date Range: [12/2021 - ] |
| Title: A25A-FXS (EMISSION CONTROL): EGR VALVE: INSTALLATION; 2022 - 2024 MY RAV4 HV [12/2021 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. SET EGR VALVE ASSEMBLY
HINT:
Perform "Inspection After Repair" after replacing the EGR valve assembly.
Click here
(a) Set the EGR valve assembly to the camshaft housing.
HINT:
At this time, do not install the parts with bolts.
(b) Install the No. 4 water by-pass hose to the EGR valve assembly and slide the clip to secure it.
(c) Connect the No. 8 water by-pass hose to the EGR valve assembly and slide the clip to secure it.
2. INSTALL EGR COOLER ASSEMBLY
Click here
3. INSTALL EGR VALVE ASSEMBLY
(a) Using an 8 mm socket wrench, install the EGR valve assembly to the camshaft housing with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
4. INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY
(a) Install a new EGR inlet gasket to the intake manifold.
(b) Install a new EGR valve adapter gasket to the No. 1 EGR pipe sub-assembly.
(c) Using an 8 mm socket wrench, install the No. 1 EGR pipe sub-assembly to the intake manifold and EGR valve assembly with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
5. CONNECT ENGINE WIRE
(a) Attach the 2 wire harness clamps to connect the engine wire.
(b) Install the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(c) Connect the EGR valve assembly connector.
|
(d) Attach the 3 hose clamps to connect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose. |
|
|
|