Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM10000000218R0 |
Model Year Start: 2022 |
Model: RAV4 |
Prod Date Range: [12/2021 -
] |
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (w/o Vacuum Brake Booster): C13B800; Electric Parking Brake Actuator; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 - ] |
DTC
|
C13B800
|
Electric Parking Brake Actuator
|
DESCRIPTION
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Memory
|
Note
|
C13B800
|
Electric Parking Brake Actuator
|
|
-
Parking brake actuator assembly
-
Rear brake
|
DTC stored
|
An electric parking brake system malfunction is displayed on the multi-information display.
|
CAUTION / NOTICE / HINT
NOTICE:
-
Although DTC C13B800 may be stored after entering pad replacement mode, this is not a malfunction.
-
Although DTC C13B800 may be stored after forcibly releasing the parking brake, this is not a malfunction.
-
To ensure that the electric parking brake does not operate, wait for 3 minutes or more with the ignition switch off, the driver door closed, and the brake pedal not depressed, then disconnect each connector, fuse and relay.
-
After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Click here
-
When replacing the No. 2 skid control ECU (brake actuator assembly), operate the electric parking brake switch (integration control and panel assembly) as the parking brake indicator light blinks when the ignition switch is first turned ON.
PROCEDURE
(a) Using the GTS, check for DTCs other than DTC C13B800.
Chassis > Brake/EPB > Trouble Codes
Result
|
Proceed to
|
Only DTC C13B800 is output
|
A
|
DTCs other than C13B800 are output
|
B
|
B |
|
GO TO DIAGNOSTIC TROUBLE CODE CHART
|
A
|
|
|
2.
|
ELECTRIC PARKING BRAKE OPERATION CHECK
|
(a) With the wheels not contacting the ground, check the condition of the rear wheels when the electric parking brake is operating and not operating.
Click here
NEXT |
|
REPAIR OR REPLACE ABNORMAL WHEELS
|
|