| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM10000000218QK |
| Model Year Start: 2022 | Model: RAV4 | Prod Date Range: [12/2021 - ] |
| Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (w/o Vacuum Brake Booster): C059704,C059746,C13CF1C,C13D41C; Brake System Control Module "A" System Internal Failure; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 - ] | ||
|
DTC |
C059704 |
Brake System Control Module "A" System Internal Failure |
|
DTC |
C059746 |
Brake System Control Module "A" Calibration / Parameter Memory Failure |
|
DTC |
C13CF1C |
Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range |
|
DTC |
C13D41C |
Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range |
DESCRIPTION
The following DTCs are stored when a malfunction occurs in the No. 2 skid control ECU (brake actuator assembly).
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Memory |
Note |
|---|---|---|---|---|---|
|
C059704 |
Brake System Control Module "A" System Internal Failure |
No. 2 skid control ECU (brake actuator assembly) internal malfunction |
No. 2 skid control ECU (brake actuator assembly) |
DTC stored |
An electric parking brake system malfunction is displayed on the multi-information display. |
|
C059746 |
Brake System Control Module "A" Calibration / Parameter Memory Failure |
No. 2 skid control ECU (brake actuator assembly) internal malfunction |
No. 2 skid control ECU (brake actuator assembly) |
DTC stored |
An electric parking brake system malfunction is displayed on the multi-information display. |
|
C13CF1C |
Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range |
No. 2 skid control ECU (brake actuator assembly) internal malfunction |
No. 2 skid control ECU (brake actuator assembly) |
DTC stored |
An electric parking brake system malfunction is displayed on the multi-information display. |
|
C13D41C |
Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range |
No. 2 skid control ECU (brake actuator assembly) internal malfunction |
No. 2 skid control ECU (brake actuator assembly) |
DTC stored |
An electric parking brake system malfunction is displayed on the multi-information display. |
CAUTION / NOTICE / HINT
NOTICE:
- To ensure that the electric parking brake does not operate, wait for 3 minutes or more with the ignition switch off, the driver door closed, and the brake pedal not depressed, then disconnect each connector, fuse and relay.
-
After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Click here
![2022 - 2024 MY RAV4 RAV4 HV [12/2021 - ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY](/t3Portal/stylegraphics/info.gif)
- When replacing the No. 2 skid control ECU (brake actuator assembly), operate the electric parking brake switch (integration control and panel assembly) as the parking brake indicator light blinks when the ignition switch is first turned ON.
PROCEDURE
|
1. |
REPLACE NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) |
Click here
| NEXT |
|
END |
|
|