Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM10000000214R4
Model Year Start: 2022 Model: RAV4 Prod Date Range: [12/2021 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C14E614,C14E914; Left Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]

DTC

C14E614

Left Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open

DTC

C14E914

Right Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open

DESCRIPTION

Refer to DTC C050C12.

Click here 2022 MY RAV4 RAV4 HV [12/2021 - 10/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C050C12; Left Rear Wheel Speed Sensor Circuit Short to Battery 2023 - 2024 MY RAV4 RAV4 HV [10/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C050C12; Left Rear Wheel Speed Sensor Circuit Short to Battery

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Note

C14E614

Left Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open

With the +BS terminal voltage 9.5 to 17.4 V, the sensor power supply voltage decreases for 0.5 seconds or more.

No. 2 skid control ECU (brake actuator assembly)

Comes on

  • SAE Code: C14E7
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)

C14E914

Right Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open

With the +BS terminal voltage 9.5 to 17.4 V, the sensor power supply voltage decreases for 0.5 seconds or more.

No. 2 skid control ECU (brake actuator assembly)

Comes on

  • SAE Code: C14EA
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)

MONITOR DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) monitors the power supply voltage of the speed sensors. If the power supply voltage is outside the normal range, the MIL is illuminated and a DTC is stored.

MONITOR STRATEGY

Related DTCs

C14E7: Wheel speed sensor (RL) voltage circuit low

C14EA: Wheel speed sensor (RR) voltage circuit low

Required Sensors/Components(Main)

Speed sensor

Required Sensors/Components(Related)

No. 2 skid control ECU (brake actuator assembly)

Speed sensor

Frequency of Operation

Continuous

Duration

0.528 seconds: C14E7 (Case 1) and C14EA (Case 1)

60 seconds: C14E7 (Case 2) and C14EA (Case 2)

MIL Operation

Immediately

Sequence of Operation

None

TYPICAL ENABLING CONDITIONS

C14E7 (Case 1)

Monitor runs whenever the following DTCs are not stored

C050D (Case 4): Wheel speed sensor (RL) range/performance

C050E: Wheel speed sensor (RL) voltage circuit open

C050F: Wheel speed sensor (RL) voltage circuit high

C1241: Brake system voltage input out of range low

C137D: Brake system voltage input out of range high

All of the following conditions are met

-

+BS voltage

9.5 V or more, and 17.4 V or less

Command to wheel speed sensor power supply

On

Wheel speed sensor current

Less than 0.034 A

IG1

On

C14E7 (Case 2)

Monitor runs whenever the following DTCs are not stored

C050D (Case 4): Wheel speed sensor (RL) range/performance

C050E: Wheel speed sensor (RL) voltage circuit open

C050F: Wheel speed sensor (RL) voltage circuit high

C137D: Brake system voltage input out of range high

All of the following conditions are met

-

+BS voltage

9.5 V or more, and 17.4 V or less

Command to wheel speed sensor power supply

On

Wheel speed sensor current

Less than 0.034 A

C14EA (Case 1)

Monitor runs whenever the following DTCs are not stored

C0513 (Case 4): Wheel speed sensor (RR) range/performance

C0514: Wheel speed sensor (RR) voltage circuit open

C0515: Wheel speed sensor (RR) voltage circuit high

C1241: Brake system voltage input out of range low

C137D: Brake system voltage input out of range high

All of the following conditions are met

-

+BS voltage

9.5 V or more, and 17.4 V or less

Command to wheel speed sensor power supply

On

Wheel speed sensor current

Less than 0.034 A

IG1

On

C14EA (Case 2)

Monitor runs whenever the following DTCs are not stored

C0513 (Case 4): Wheel speed sensor (RR) range/performance

C0514: Wheel speed sensor (RR) voltage circuit open

C0515: Wheel speed sensor (RR) voltage circuit high

C137D: Brake system voltage input out of range high

All of the following conditions are met

-

+BS voltage

9.5 V or more, and 17.4 V or less

Command to wheel speed sensor power supply

On

Wheel speed sensor current

Less than 0.034 A

TYPICAL MALFUNCTION THRESHOLDS

C14E7 (Case 1) and C14EA (Case 1)

Wheel speed sensor power supply voltage

4.1 V or less

C14E7 (Case 2) and C14EA (Case 2)

Wheel speed sensor power supply voltage

4.1 V or less and repeatedly higher than 4.1 V within 0.204 seconds

COMPONENT OPERATING RANGE

All

Wheel speed sensor power supply voltage

Higher than 4.1 V

CONFIRMATION DRIVING PATTERN

NOTICE:

When performing the normal judgment procedure, make sure that the driver door is closed and is not opened at any time during the procedure.

HINT:

  • After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
  • When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure.
  1. Connect the GTS to the DLC3.
  2. Turn the ignition switch to ON and turn the GTS on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the ignition switch off.
  5. Turn the ignition switch to ON (READY) and turn the GTS on.
  6. Drive the vehicle straight at a speed of 15 km/h (9 mph) or more for 60 seconds or more. [*]

    HINT:

    [*]: Normal judgment procedure.

    The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.

  7. Enter the following menus: Chassis / Brake/EPB / Utility / All Readiness.
  8. Check the DTC judgment result.

    HINT:

    • If the judgment result shows NORMAL, the system is normal.
    • If the judgment result shows ABNORMAL, the system has a malfunction.
    • If the judgment result shows INCOMPLETE, perform driving pattern again.

CAUTION / NOTICE / HINT

NOTICE:

After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration" after performing "Reset Memory".

Click here 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY

PROCEDURE

1.

REPLACE BRAKE ACTUATOR ASSEMBLY

Click here 2022 MY RAV4 RAV4 HV [12/2021 - 10/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (w/o Vacuum Brake Booster): REMOVAL 2023 MY RAV4 RAV4 HV [10/2022 - 10/2023]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (w/o Vacuum Brake Booster): REMOVAL 2024 MY RAV4 RAV4 HV [10/2023 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (w/o Vacuum Brake Booster): REMOVAL

NEXT

END