Heavy steering
|
Front tires (improperly inflated, unevenly worn)
|
|
Front wheel alignment (incorrect)
|
|
Front suspension (Lower ball joint)
|
|
Rack and pinion power steering gear assembly
|
|
Torque sensor (Rack and pinion power steering gear assembly)
|
Power steering motor (Rack and pinion power steering gear assembly)
|
Steering column assembly
|
|
Auxiliary battery and power source circuit (for A25A-FKS)
|
|
Auxiliary battery and power source circuit (for A25A-FXS)
|
|
Power source voltage of power steering ECU (Rack and pinion power steering gear assembly)
|
|
CAN communication system (for Gasoline Model)
|
|
CAN communication system (for HV Model)
|
|
Vehicle condition (Steering wheel is turned from left to right repeatedly with vehicle stopped or heavy load is continuously applied to vehicle)
|
|
Steering effort differs between right and left or is uneven
|
Rotation angle sensor initialization and torque sensor zero point calibration incomplete
|
|
Front tires (improperly inflated, unevenly worn)
|
|
Front wheel alignment (incorrect)
|
|
Front suspension (Lower ball joint)
|
|
Rack and pinion power steering gear assembly
|
|
Torque sensor (Rack and pinion power steering gear assembly)
|
Power steering ECU (Rack and pinion power steering gear assembly)
|
Steering column assembly
|
|
While driving, steering effort does not change in accordance with vehicle speed, or steering wheel does not return to its centered position easily
|
Skid control ECU (Brake actuator assembly) (for Gasoline Model)
|
|
No. 2 skid control ECU (brake actuator assembly)(for HV Model)
|
|
Speed sensor (for Gasoline Model)
|
|
Speed sensor (for HV Model)
|
|
Torque sensor (Rack and pinion power steering gear assembly)
|
|
Power steering motor (Rack and pinion power steering gear assembly)
|
Power steering ECU (Rack and pinion power steering gear assembly)
|
CAN communication system (for Gasoline Model)
|
|
CAN communication system (for HV Model)
|
|
Friction sounds occur when turning steering wheel during low speed driving
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
Steering column assembly
|
|
Spiral cable sub-assembly
|
|
Steering column cover contacting steering wheel assembly
|
|
High-pitched sound (squeaking) occurs when turning steering wheel slowly with vehicle stopped
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
Steering wheel installation (incorrect)
|
|
Steering wheel vibrates and noise occurs when turning steering wheel from lock to lock
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
Steering column assembly
|
|
Steering wheel installation (incorrect)
|
|
Drive mode does not change
|
Drive mode select switch (Integration control and panel assembly)
|
|
EPS warning light remains on
|
EPS warning light circuit
|
|