Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM10000000201YC
Model Year Start: 2022 Model: RAV4 Prod Date Range: [12/2021 -           ]
Title: MIRROR (EXT): OUTER MIRROR SWITCH: INSPECTION; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]

INSPECTION

PROCEDURE

1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

(a) Check the mirror select switch and mirror adjust switch.

(1) Select the mirror select switch to the L position.

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for Left side):

Tester Connection

Condition

Specified Condition

20 (VL) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

20 (VL) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

21 (HL) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

21 (HL) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

(3) Select the mirror select switch to the R position.

(4) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for Right side):

Tester Connection

Condition

Specified Condition

18 (VR) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

18 (VR) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

23 (HR) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

23 (HR) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

*1

Mirror Adjust Switch

*2

Mirror Select Switch

*a

Component without harness connected

(Outer Mirror Switch Assembly)

(b) Check that the LED illuminates.

(1) Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

OK:

Auxiliary battery Connection

Specified Condition

Auxiliary battery positive (+) → 10 (ILL+)

Auxiliary battery negative (-) → 22 (ILL-)

Illuminates

If the result is not as specified, replace the outer mirror switch assembly.

2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

(a) Check the mirror retract switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

13 (B) - 11 (MF)

9 (E) - 12 (MR)

Return position

Below 1 Ω

13 (B) - 11 (MF)

9 (E) - 12 (MR)

Driving position

10 kΩ or higher

9 (E) - 11 (MF)

Retract position

Below 1 Ω

If the result is not as specified, replace the outer mirror switch assembly.

*1

Mirror Retract Switch

*2

Mirror Adjust Switch

*3

Mirror Select Switch

*a

Component without harness connected

(Outer Mirror Switch Assembly)

(b) Check the mirror select switch and mirror adjust switch.

(1) Select the mirror select switch to the L position.

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for Left side):

Tester Connection

Condition

Specified Condition

20 (VL) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

20 (VL) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

21 (HL) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

21 (HL) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

(3) Select the mirror select switch to the R position.

(4) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for Right side):

Tester Connection

Condition

Specified Condition

18 (VR) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

18 (VR) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

23 (HR) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

23 (HR) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

(c) Check that the LED illuminates.

(1) Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

OK:

Auxiliary battery Connection

Specified Condition

Auxiliary battery positive (+) → 10 (ILL+)

Auxiliary battery negative (-) → 22 (ILL-)

Illuminates

If the result is not as specified, replace the outer mirror switch assembly.