Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM10000000201LR
Model Year Start: 2022 Model: RAV4 Prod Date Range: [12/2021 -           ]
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): INSTALLATION; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY LH

(a) for LED Type Turn Signal Light:

(1) Connect the connector and attach the wire harness clamp.

(b) for Bulb Type Turn Signal Light:

(1) Connect the 4 connectors and attach the wire harness clamp.

(c) Set the headlight assembly LH in the direction indicated by the arrow (1) to the vehicle.

*a

Lower Bracket

Place Hands Here

Install in this Direction (1)

Install in this Direction (2)

(d) Slide the headlight assembly LH in the direction indicated by the arrow (2) and attach the guide and lower bracket.

(e) Place your hand on 2 brackets of the headlight assembly LH to set them on the screw seats.

NOTICE:

Be careful not to break the bracket.

(f) Install the bolt and 3 screws.

Torque:

for Bolt :

5.4 N·m {55 kgf·cm, 48 in·lbf}

Screw

Bolt

2. INSTALL FRONT BUMPER ASSEMBLY

  • except Off Road Package:

    Click here 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER (except Off Road Package): INSTALLATION

  • for Off Road Package:

    Click here 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Off Road Package): INSTALLATION

3. ADJUST HEADLIGHT AIMING

Click here 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): ADJUSTMENT