LIGHTING (EXT): AUTOMATIC HIGH BEAM SYSTEM: PRECAUTION; 2021 MY RAV4 RAV4 HV [08/2020

Last Modified: 01-30-2024	6.11:8.1.0	Doc ID: RM100000001WDI4
Model Year Start: 2021	Model: RAV4	Prod Date Range: [08/2020 - 12/2021]
Title: LIGHTING (EXT): AUTOMATIC HIGH BEAM SYSTEM: PRECAUTION; 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]

PRECAUTION

HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA

(a) The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Forward Recognition Camera System.

for one time recognition: Click here

for sequential recognition: Click here

PRECAUTION FOR AUTOMATIC HIGH BEAM SYSTEM

(a) General Description

The automatic high beam system is a system that helps ensure visibility by automatically turning the high beam headlights on and off. Additionally, due to control limitations of the automatic high beam system, it may be necessary to manually turn the high beam headlights on and off. For safety reasons, make sure to turn the high beam headlights on and off manually according to the driving conditions.

(b) Conditions Unsuitable for Using Automatic High Beam System

Under the following conditions, the automatic high beam system might not detect other vehicles or lights correctly, or the high beam headlights might cause glare or flash pedestrians or the occupants of other vehicles. Manual operation should be considered.

Factor	Condition
Weather/Climate	Automatic high beam system
Front windshield	Windshield is dirty (due to dirt, water spots, insects), or dirty on the inside of the vehicle or fogged up.* Windshield has cracks or damage. Window glass with different light transmittance are installed (non-genuine parts).
Forward recognition camera	Refer to Front Camera System.
Nearby vehicles or lights	When lights similar to headlights or taillights are in the vicinity of the vehicle. When a nearby vehicle has no lights or its lights are off. When a vehicle in front has misaligned lights, or its lights are changing color. When a vehicle in front has extremely dirty headlights or taillights.
Road conditions	When driving in areas where the conditions often change between bright and dark. When driving on hilly roads. When driving on winding roads or around sharp curves. When driving on bumpy roads (cobblestone paving, gravel roads, rough unpaved roads, etc.). When highly reflective objects are in front of the vehicle (mirrors, road signs, etc.).
Own vehicle	When the headlights are damaged, deformed or dirty. When the vehicle posture is abnormal (posture has changed due to the vehicle being fully loaded, a trailer being towed, road conditions, etc.). When the vehicle has other malfunctions or has been modified.
Automatic high beam system	Malfunction: When the automatic high beam indicator light on the combination meter assembly is off and "Headlight System Malfunction Visit Your Dealer" is displayed on the multi-information display. Others: When the automatic high beam system does not seem to be turning the high beam headlights on and off properly. When the automatic high beam system is frequently turning the high beam headlights on and off. When the glare from the high beam headlights would disturb pedestrians or the drivers of other vehicles.

HINT:

*: When the inside of the windshield is confirmed to be dirty, remove the forward recognition camera and hood, and clean the inside of the windshield using one of the cleaning methods below.

Remove the dirt using a melamine sponge and water, and wipe off with a towel, shop cloth or equivalent.
Clean with glass cleaner.

(Axis adjustment is not needed even if the camera is removed and installed when cleaning)

For the forward recognition camera removal procedure, Click here