Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001QZ2G
Model Year Start: 2021 Model: RAV4 Prod Date Range: [08/2020 - 10/2022]
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Start Up Signal Circuit between Radio Receiver Assembly and Navigation ECU; 2021 - 2022 MY RAV4 RAV4 HV [08/2020 - 10/2022]

Start Up Signal Circuit between Radio Receiver Assembly and Navigation ECU

DESCRIPTION

This circuit includes the navigation ECU and radio and display receiver assembly.

WIRING DIAGRAM

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NAVIGATION ECU)

(a) Disconnect the G1 radio and display receiver assembly connector.

(b) Disconnect the G15 navigation ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G1-7 (SUP) - G15-21 (SUP)

Always

Below 1 Ω

G1-7 (SUP) - Body ground

Always

10 kΩ or higher

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR