OPERATION CHECK

CHECK CUSTOMIZE PARAMETERS

NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.

Click here

CHECK BASIC FUNCTION

(a) Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.

(b) Check that all doors lock when the lock switch is pressed.

(c) Check that all doors unlock when the unlock switch is pressed.*1

(d) Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 3 seconds.*2

(e) Check that the back door opens or closes when the power back door switch is pressed and held for 0.8 seconds or more.*3

CHECK CHATTERING PREVENTION FUNCTION

(a) Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, and check that the corresponding operation is carried out.

CHECK SWITCH OPERATION FAIL-SAFE FUNCTION

(a) Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.

CHECK ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION

(a) When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the hazard warning lights flash once.*1

(c) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*2

(d) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*3

(e) When the back door is opened or closed by wireless operation, the hazard warning lights flash twice.*4

CHECK ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION

(a) When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the buzzer sounds once.*1

(c) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.*2

(d) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.*3

(e) When the back door is opened or closed by wireless operation, the wireless door lock buzzer sounds.*4

CHECK AUTOMATIC LOCKING FUNCTION

(a) Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 60 seconds of all doors being unlocked by pressing the unlock switch.

(b) Check that the automatic locking function does not operate when any door has been opened within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

(c) Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

HINT:

When the wireless lock with doors open function is set to "ON", this function is canceled even if set to "ON".

CHECK DOOR AJAR WARNING FUNCTION

(a) Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

CHECK DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR

(a) With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.

HINT:

The doors can be unlocked even when a door is open or ajar.

CHECK WIRELESS LOCK WITH DOORS OPEN FUNCTION

HINT:

When the wireless lock with doors open function is set to "ON", door ajar function is canceled even if the door ajar function is set to "ON".

(a) Perform a wireless lock operation with any door open.

(b) Check that the doors are locked by when the doors are closed.

CHECK POWER BACK DOOR RESERVATION LOCK FUNCTION (w/ Power Back Door System)

(a) Check that the doors lock after the back door is closed when the electrical key transmitter sub-assembly lock switch is operated during the back door closing operation via the power back door function.

CHECK PANIC ALARM CONTROL FUNCTION

Click here

CHECK ILLUMINATED ENTRY FUNCTION

Click here

CHECK MEMORY CALL FUNCTION (w/ Memory Call Function)

Click here

CHECK POWER WINDOW OPERATION FUNCTION

Click here