INSTALLATION

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

(a) Install the No. 2 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

NOTICE:

If the ECM has been struck or dropped, replace it.

2. INSTALL NO. 1 ECM BRACKET

(a) Install the No. 1 ECM bracket to the ECM with the 2 screws.

Torque:

4.5 N·m {46 kgf·cm, 40 in·lbf}

NOTICE:

If the ECM has been struck or dropped, replace it.

3. INSTALL ECM

(a) Install the ECM with the 2 nuts and bolt.

Torque:

8.0 N·m {82 kgf·cm, 71 in·lbf}

NOTICE:

If the ECM has been struck or dropped, replace it.

(b) Install the bolt and attach the clamp.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(c) Connect the 2 connectors to the ECM and push down the lever to lock it. NOTICE: When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter. Be sure to securely connect the ECM connectors.

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Click here

5. INSTALL BATTERY HOLE COVER

Click here

6. INSTALL REAR NO. 2 FLOOR BOARD

Click here

7. INSTALL DECK BOARD ASSEMBLY

Click here

8. PERFORM INITIALIZATION

Click here