Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001QI82
Model Year Start: 2021 Model: RAV4 Prod Date Range: [08/2020 -           ]
Title: HEATING / AIR CONDITIONING: COMPRESSOR (for A25A-FKS): REMOVAL; 2021 - 2024 MY RAV4 [08/2020 -        ]

REMOVAL

PROCEDURE

1. PRECAUTION

NOTICE:

Do not race the engine before replacing the compressor assembly with pulley.

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Click here 2019 - 2024 MY RAV4 RAV4 HV [02/2019 -        ]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+

3. REMOVE V-RIBBED BELT

Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; MAINTENANCE: A25A-FKS DRIVE BELT: REMOVAL

4. REMOVE INLET AIR CLEANER ASSEMBLY

Click here 2021 - 2024 MY RAV4 [08/2020 -        ]; A25A-FKS (ENGINE CONTROL): THROTTLE BODY: REMOVAL+

5. REMOVE SECURITY HORN ASSEMBLY (w/ Security Horn)

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SECURITY HORN ASSEMBLY: REMOVAL

6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the suction hose sub-assembly.

NOTICE:

Do not apply excessive force to the suction hose sub-assembly.

(b) Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

(a) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose.

NOTICE:

Do not apply excessive force to the No. 1 cooler refrigerant discharge hose.

(b) Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

(a) Disconnect the connector.

(b) for Type A:

(1) Remove the 2 nuts.

(2) Using an E8 "TORX" socket wrench, remove the 2 stud bolts, 2 bolts and compressor assembly with pulley.

Bolt

Stud Bolt

(c) for Type B:

(1) Remove the 4 bolts and compressor assembly with pulley.