| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001QI3W |
| Model Year Start: 2021 | Model: RAV4 | Prod Date Range: [08/2020 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: ON-VEHICLE INSPECTION; 2021 - 2024 MY RAV4 RAV4 HV [08/2020 - ] | ||
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the airbag ECU assembly.
PROCEDURE
1. INSPECT AIRBAG ECU ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
![2021 - 2024 MY RAV4 RAV4 HV [08/2020 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
2. INSPECT AIRBAG ECU ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the airbag ECU assembly installed to the vehicle.
(1) The defects are as follows:
- Cracks on the ECU housing
- Dents on the ECU housing
- Chips on the ECU housing
- Cracks or other damage to the connector
- Peeling of the label
OK:
No defects are found.
If any defects are found, replace the airbag ECU assembly with a new one.
3. INSPECT AIR BAG ECU ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)
(a) Replace the airbag ECU assembly.
HINT:
The airbag ECU assembly should be replaced after any of the SRS parts has deployed as it has been subjected to an impact.
|
|