Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001OXIX
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 10/2023]
Title: DOOR / HATCH: POWER BACK DOOR SYSTEM (for Gasoline Model): Power Back Door cannot be Operated Frequently; 2019 - 2023 MY RAV4 [11/2018 - 10/2023]

Power Back Door cannot be Operated Frequently

DESCRIPTION

If the power back door system does not operate, a vehicle malfunction, environmental problem, and customer (including passenger) operation are possible causes. Using Operation History allows the cause to be narrowed down, and repair, replacement, and in some circumstances explaining the environment or usage conditions can help resolve the malfunction.

CAUTION / NOTICE / HINT

NOTICE:

  • If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read out and saved, the operation history information could be lost.
  • The function "Read operation history" uses the current system time setting inside the Techstream and the time counter inside the controlling ECU to calculate the timings shown in the operation history. For this reason, before reading out the operation history, first make sure that the Techstream system clock is accurately set to the current time.
  • The time counter in the control ECU may deviate by up to +/- 10% due to the characteristics of the time counter.
  • The time counter in the control ECU is reset approximately 34 days before the "Current" value due to the characteristics of the time counter. Therefore, the time information stored before the 34th day may not be accurately displayed.

PROCEDURE

1.

CHECK OPERATION HISTORY (INACTIVE)

(a) Enter the following menus: Body Electrical / Back Door / Utility / Operation History.

Click here 2019 - 2023 MY RAV4 [11/2018 - 10/2023]; DOOR / HATCH: POWER BACK DOOR SYSTEM (for Gasoline Model): CHECK FOR INTERMITTENT PROBLEMS

Body Electrical > Back Door > Utility

Tester Display

Operation History

(b) According to the display on the Techstream, check the "Power Back Door Operation (inactive)".

Result

Proceed to

Power back door operation (inactive) item is not stored.

A

Power back door operation (inactive) item is stored.

B
A

USE SIMULATION METHOD TO CHECK

B

END (explain the cause why it did not operate to the customer)