Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001MHU9
Model Year Start: 2020 Model: RAV4 Prod Date Range: [10/2019 - 01/2020]
Title: LIGHTING (INT): PERSONAL LIGHT: INSPECTION; 2020 MY RAV4 RAV4 HV [10/2019 - 01/2020]

INSPECTION

PROCEDURE

1. INSPECT MAP LIGHT ASSEMBLY (for TMC Made)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

12 (+B1) - 13 (GND)

Map light switch LH OFF

10 kΩ or higher

Map light switch LH ON

Below 1 Ω

Map light switch RH OFF

10 kΩ or higher

Map light switch RH ON

Below 1 Ω

12 (+B1) - 1 (CTY)

Courtesy switch OFF position

10 kΩ or higher

Courtesy switch DOOR position

Below 1 Ω

If the result is not as specified, replace the map light assembly.

*a

Component without harness connected

(Map Light Assembly)

2. INSPECT MAP LIGHT ASSEMBLY (for TMMC Made)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

1 (+B1) - 20 (GND)

Map light switch LH OFF

10 kΩ or higher

Map light switch LH ON

Below 1 Ω

Map light switch RH OFF

10 kΩ or higher

Map light switch RH ON

Below 1 Ω

1 (+B1) - 18 (CTY)

Courtesy switch OFF position

10 kΩ or higher

Courtesy switch DOOR position

Below 1 Ω

If the result is not as specified, replace the map light assembly.

*a

Component without harness connected

(Map Light Assembly)