| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001KGA1 |
| Model Year Start: 2020 | Model: RAV4 | Prod Date Range: [10/2019 - 08/2020] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: TERMINALS OF ECU; 2020 MY RAV4 RAV4 HV [10/2019 - 08/2020] | ||
TERMINALS OF ECU
HINT:
Check from the rear of the connector while it is connected to the components.
RADIO AND DISPLAY RECEIVER ASSEMBLY
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
G4-1 (FR+) - G3-1 (GND1) |
LA-LG - W-B*1 W - W-B*2 |
Sound signal (Front right)*1 Sound signal (Right)*2 |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G4-2 (FL+) - G3-1 (GND1) |
LA-B - W-B*1 B - W-B*2 |
Sound signal (Front left)*1 Sound signal (Left)*2 |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G4-3 (RL+) - G3-1 (GND1) |
LA-G - W-B*1 Y - W-B*2 |
Sound signal (Rear left)*1 Voice signal*2 |
Audio system playing*1 Voice guidance sounding*2 |
A waveform synchronized with sound signals is output*1 A waveform synchronized with voice signals is output*2 |
|
G4-4 (RR+) - G3-1 (GND1)*1 |
LA-R - W-B |
Sound signal (Rear right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G4-6 (FR-) - G3-1 (GND1) |
LA-L - W-B*1 R - W-B*2 |
Sound signal (Front right)*1 Sound signal (Right)*2 |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G4-7 (FL-) - G3-1 (GND1) |
LA-R - W-B*1 G - W-B*2 |
Sound signal (Front left)*1 Sound signal (Left)*2 |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G4-8 (RL-) - G3-1 (GND1) |
LA-GR - W-B*1 BR - W-B*2 |
Sound signal (Rear left)*1 Voice signal*2 |
Audio system playing*1 Voice guidance sounding*2 |
A waveform synchronized with sound signals is output*1 A waveform synchronized with voice signals is output*2 |
|
G4-9 (RR-) - G3-1 (GND1)*1 |
LA-G - W-B |
Sound signal (Rear right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
G3-1 (GND1) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
G3-4 (+B1) - G3-1 (GND1) |
LG - W-B |
Power source (+B) |
Ignition switch off |
11 to 14 V |
|
G3-5 (TX1+)*2 |
B |
AVC-LAN communication signal |
- |
- |
|
G3-6 (TX1-)*2 |
W |
AVC-LAN communication signal |
- |
- |
|
G3-15 (ACC1) - G3-1 (GND1) |
GR - W-B |
Power source (ACC) |
Ignition switch off |
Below 1 V |
|
Ignition switch ACC |
11 to 14 V |
|||
|
G3-21 (SW1) - G3-24 (SWG) |
W - W-B |
Steering pad switch signal |
No switch pushed |
2.97 to 3.56 V |
|
Seek+ switch pushed |
0.27 to 0.35 V |
|||
|
Seek- switch pushed |
0.86 to 1.03 V |
|||
|
Volume+ switch pushed |
1.51 to 1.79 V |
|||
|
Volume- switch pushed |
2.22 to 2.66 V |
|||
|
G3-22 (SW2) - G3-24 (SWG) |
LG - W-B |
Steering pad switch signal |
No switch pushed |
2.97 to 3.56 V |
|
MODE switch pushed |
0.27 to 0.35 V |
|||
|
On/off hook switch pushed |
1.51 to 1.79 V |
|||
|
Voice switch pushed |
2.22 to 2.66 V |
|||
|
G3-24 (SWG) - G3-1 (GND1) |
W-B - W-B |
Steering pad switch ground |
Always |
Below 1 Ω |
|
G3-25 (MUT1) - G3-1 (GND1)*2 |
BE - W-B |
Mute signal |
Audio system playing |
2.0 V or higher |
|
Audio system changing modes |
Below 1 V |
|||
|
G3-27 (SPD) - G3-1 (GND1) |
LG - W-B |
Vehicle speed signal |
See "Check Vehicle Signal" in Operation Check Click here
|
- |
|
G3-28 (REV) - G3-1 (GND1) |
W - W-B |
Reverse signal |
See "Check Vehicle Signal" in Operation Check
|
- |
|
G2-3 (TMUT) - G3-1 (GND1)*3 |
BE - W-B |
Mute signal |
Audio system playing |
Above 2.0 V |
|
Emergency call mode |
Below 1 V |
|||
|
G2-5 (CNH1) |
L |
Local bus communication signal |
- |
- |
|
G2-6 (CNL1) |
W |
Local bus communication signal |
- |
- |
|
G2-13 (CANH) |
B |
CAN communication signal |
- |
- |
|
G2-14 (CANL) |
W |
CAN communication signal |
- |
- |
|
G2-15 (ILL+) - G3-1 (GND1) |
G - W-B |
Illumination signal |
Light control switch off |
Below 1 V |
|
Light control switch in tail or head position |
11 to 14 V |
|||
|
G2-16 (ILL-) - G3-1 (GND1) |
BE - W-B |
Illumination signal |
Light control switch off |
Below 1 V |
|
Light control switch in tail or head position |
Pulse generation |
|||
|
G2-18 (CSW+) - G3-1 (GND1)*4 |
L - W-B |
Camera image change signal |
Ignition switch ON, shift position not in R →in R |
3.5 V or higher → Below 1 V |
|
G2-19 (IG) - G3-1 (GND1) |
W - W-B |
Power source (IG) |
Ignition switch off |
Below 1 V |
|
Ignition switch ON |
11 to 14 V |
|||
|
G2-20 (PKB) - G3-1 (GND1) |
B - W-B |
Parking brake signal |
See "Check Vehicle Signal" in Operation Check Click here
|
- |
|
G2-21 (MIN+) - G3-1 (GND1) |
W - W-B*5 SB - W-B*8 |
Microphone voice signal |
See "Check Microphone" in Operation Check Click here
|
- |
|
G2-22 (MIN-) - G3-1 (GND1) |
R - W-B*5 V - W-B*8 |
Microphone voice signal |
See "Check Microphone" in Operation Check Click here
|
- |
|
G2-23 (MACC) - G3-1 (GND1)*5 |
B - W-B |
Telephone microphone assembly power supply |
Ignition switch off |
Below 1 V |
|
Ignition switch ACC |
4 to 6 V |
|||
|
G2-24 (SGND) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G2-25 (SNS2) - G3-1 (GND1) |
BE - W-B |
Microphone connection detection signal |
Always |
Below 1 V |
|
G2-26 (CSLD) - Body ground*6 |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G2-27 (CGND) - Body ground*6 |
G - Body ground |
Camera ground |
Always |
Below 1 Ω |
|
G2-28 (V+) - G2-29 (V-)*7 |
V - SB*4 B - W*6 |
Video signal |
Ignition switch ON, Shift position in R Camera lens not covered, displaying image |
Pulse generation (Refer to waveform 1) |
|
Ignition switch ON, Shift position in R Camera lens covered, blacking out screen |
Pulse generation (Refer to waveform 2) |
|||
|
G2-29 (V-) - Body ground*7 |
SB - Body ground*4 W - Body ground*6 |
Video signal ground |
Always |
Below 1 Ω |
|
G2-30 (CA+) - Body ground*6 |
R - Body ground |
Power source |
Ignition switch ACC |
5.5 to 7.05 V |
|
G106-1 (USV1) |
# |
Power source |
- |
- |
|
G106-2 (US1-) |
# |
Data signal |
- |
- |
|
G106-3 (US1+) |
# |
Data signal |
- |
- |
|
G106-4 (UGD1) |
# |
Ground |
- |
- |
|
G106-5 (USG1) |
Shielded |
Shield ground |
- |
- |
|
G122-1 (US4+) |
# |
USB communication line |
- |
- |
|
G122-2 (US4-) |
# |
USB communication line |
- |
- |
|
G122-3 (UGD4) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G121-1 (GV2-) |
# |
Video signal (Digital) |
- |
- |
|
G121-2 (GV2+) |
# |
Video signal (Digital) |
- |
- |
|
G121-3 (GVG2) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G1-7 (SUP) - G3-1 (GND1) |
B - W-B |
Start up signal |
20 seconds elapse after turning the ignition switch to ACC |
11 to 14 V |
|
G1-10 (USBV) - Body ground*8 |
L - Body ground |
DCM (telematics transceiver) power supply |
Ignition switch off |
Below 1 V |
|
Ignition switch ACC |
4.75 to 5.25 V |
|||
|
G1-11 (USBG) - Body ground*8 |
GR - Body ground |
Ground |
Always |
Below 1 Ω |
|
G1-12 (SGND) - Body ground*8 |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G1-13 (VOR+) - G3-1 (GND1)*8 |
R - W-B |
Receive voice signal |
Destination assist service in use and operator speaking to vehicle occupant |
A waveform synchronized with the received voice is output. |
|
G1-14 (VOR-) - G3-1 (GND1)*8 |
G - W-B |
Receive voice signal |
Destination assist service in use and operator speaking to vehicle occupant |
A waveform synchronized with the received voice is output. |
|
G1-15 (VOT+) - G3-1 (GND1)*8 |
B - W-B |
Sent voice signal |
Destination assist service in use and vehicle occupant speaking to operator |
A waveform synchronized with the sent voice is output. |
|
G1-16 (VOT-) - G3-1 (GND1)*8 |
W - W-B |
Sent voice signal |
Destination assist service in use and vehicle occupant speaking to operator |
A waveform synchronized with the sent voice is output. |
|
G1-19 (RST)*9 |
R |
- |
- |
- |
|
G1-22 (SI+) - G3-1 (GND1) |
SB - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
G1-23 (SI-) - G3-1 (GND1) |
V - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
G1-24 (SGND) - G3-1 (GND1) |
Shielded - W-B |
Shield ground |
Always |
Below 1 Ω |
|
G1-25 (MCO+) - G1-26 (MCO-) |
W - B |
Microphone voice signal |
See "Check Microphone (DCU)" in Operation Check
|
- |
|
G1-26 (MCO-) - G3-1 (GND1) |
B - W-B |
Microphone voice signal |
See "Check Microphone (DCU)" in Operation Check
|
- |
|
G1-28 (REV2) - G3-1 (GND1) |
W - W-B |
Reverse signal |
Ignition switch ON, shift lever not in R → in R |
2 V or less → 11 to 14 V |
|
RA-5 (ANT+) - G3-1 (GND1) |
# - W-B |
Power source of antenna |
Ignition switch ACC Radio switch on and FM or AM selected |
11 to 14 V |
- *1: for 6 Speakers
- *2: for 9 Speakers
- *3: for 6 Speakers and w/ Manual (SOS) Switch
- *4: w/ Panoramic View Monitor System
- *5: w/o Manual (SOS) Switch
- *6: w/ Parking Assist Monitor System
- *7: w/ Panoramic View Monitor System or w/ Parking Assist Monitor System
- *8: w/ Manual (SOS) Switch
- *9: Terminal exists but is not used
- #: There is no wire color information
(a) Reference (Oscilloscope waveform):
|
*a |
Waveform 1 (camera lens not covered, displaying image) |
|
*b |
Waveform 2 (camera lens covered, blacking out screen) |
|
*c |
Synchronization Signal |
|
*d |
Video Waveform |
(1) Waveform 1 (camera lens is not covered, displaying an image)
|
Item |
Content |
|---|---|
|
Measurement terminal |
G2-28 (V+) - G2-29 (V-) |
|
Measurement setting |
200 mV/DIV., 50 μs./DIV. |
|
Condition |
Ignition switch ON, shift position in R, camera lens not covered, displaying image |
HINT:
- The video waveform changes according to the image sent by the television camera assembly.
- The video waveform is constantly output when the ignition switch is ACC.
(2) Waveform 2 (camera lens is covered, blacking out the screen)
|
Item |
Content |
|---|---|
|
Measurement terminal |
G2-28 (V+) - G2-29 (V-) |
|
Measurement setting |
200 mV/DIV., 50 μs./DIV. |
|
Condition |
Ignition switch ON, shift position in R, camera lens covered, blacking out screen |
HINT:
- The video waveform changes according to the image sent by the television camera assembly.
- The video waveform is constantly output when the ignition switch is ACC.
NAVIGATION ECU (Only for models with the vehicle identification number on the certification label ending with the character A.)
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
G15-6 (VOI+) - G15-23 (GND) |
SB - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
G15-7 (VOI-) - G15-23 (GND) |
V - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
G15-8 (SLD1) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G15-9 (SPD) - G15-23 (GND) |
L - W-B |
Vehicle speed signal |
See "Check GPS and Vehicle Sensors" in Operation Check
|
- |
|
G15-10 (+B) - G15-23 (GND) |
GR - W-B |
Power source (+B) |
Ignition switch off |
11 to 14 V |
|
G15-13 (MIC+) - G15-23 (GND) |
W - W-B |
Microphone voice signal |
See "Microphone Check (MEU)" in Operation Check
|
- |
|
G15-14 (MIC-) - Body ground |
B - Body ground |
Microphone voice signal |
See "Microphone Check (MEU)" in Operation Check
|
- |
|
G15-19 (REV2) - G15-23 (GND) |
W - W-B |
Reverse signal |
Ignition switch ON, shift lever not in R → in R |
2 V or less → 11 to 14 V |
|
G15-21 (SUP) - G15-23 (GND) |
B - W-B |
Power source (ACC) |
20 seconds elapse after turning the ignition switch to ACC |
11 to 14 V |
|
G15-22 (RST)* |
R |
- |
- |
- |
|
G15-23 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
G124-1 (USB+) |
# |
USB communication line |
- |
- |
|
G124-2 (USB-) |
# |
USB communication line |
- |
- |
|
G124-3 (USBS) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G120-1 (GVO-) |
# |
Video signal (Digital) |
- |
- |
|
G120-2 (GVO+) |
# |
Video signal (Digital) |
- |
- |
|
G120-3 (GVG1) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G120-4 (US4+) |
# |
USB communication line |
- |
- |
|
G120-5 (US4-) |
# |
USB communication line |
- |
- |
|
G120-6 (UGD4) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
- *: Terminal exists but is not used
- #: There is no wire color information
NAVIGATION ECU (Except models with the vehicle identification number on the certification label ending with the character A.)
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
H7-6 (VOI+) - H7-23 (GND) |
SB - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
H7-7 (VOI-) - H7-23 (GND) |
V - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with sound is output |
|
H7-8 (SLD1) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
H7-9 (SPD) - H7-23 (GND) |
L - W-B |
Vehicle speed signal |
See "Check GPS and Vehicle Sensors" in Operation Check
|
- |
|
H7-10 (+B) - H7-23 (GND) |
GR - W-B |
Power source (+B) |
Ignition switch off |
11 to 14 V |
|
H7-13 (MIC+) - H7-23 (GND) |
W - W-B |
Microphone voice signal |
See "Microphone Check (MEU)" in Operation Check
|
- |
|
H7-14 (MIC-) - Body ground |
B - Body ground |
Microphone voice signal |
See "Microphone Check (MEU)" in Operation Check
|
- |
|
H7-19 (REV2) - H7-23 (GND) |
W - W-B |
Reverse signal |
Ignition switch ON, shift lever not in R → in R |
2 V or less → 11 to 14 V |
|
H7-21 (SUP) - H7-23 (GND) |
B - W-B |
Power source (ACC) |
20 seconds elapse after turning the ignition switch to ACC |
11 to 14 V |
|
H7-22 (RST)* |
R |
- |
- |
- |
|
H7-23 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
G124-1 (USB+) |
# |
USB communication line |
- |
- |
|
G124-2 (USB-) |
# |
USB communication line |
- |
- |
|
G124-3 (USBS) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G120-1 (GVO-) |
# |
Video signal (Digital) |
- |
- |
|
G120-2 (GVO+) |
# |
Video signal (Digital) |
- |
- |
|
G120-3 (GVG1) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
G120-4 (US4+) |
# |
USB communication line |
- |
- |
|
G120-5 (US4-) |
# |
USB communication line |
- |
- |
|
G120-6 (UGD4) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
- *: Terminal exists but is not used
- #: There is no wire color information
STEREO COMPONENT AMPLIFIER ASSEMBLY (for 9 Speakers)
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
M2-1 (+B) - M2-3 (GND) |
L - W-B |
Power source (+B) |
Ignition switch off |
11 to 14 V |
|
M2-3 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
M2-8 (WFL+) - M2-3 (GND) |
LA-Y - W-B |
Sound signal (Woofer) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-9 (FR+) - M2-3 (GND) |
LA-GR - W-B |
Sound signal (Front Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-10 (TWL+) - M2-3 (GND) |
LA-B - W-B |
Sound signal (Front Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-11 (RL+) - M2-3 (GND) |
LA-G - W-B |
Sound signal (Rear Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-12 (RR+) - M2-3 (GND) |
LA-R - W-B |
Sound signal (Rear Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-13 (TWR+) - M2-3 (GND) |
LA-BE - W-B |
Sound signal (Front Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-14 (FL+) - M2-3 (GND) |
LA-W - W-B |
Sound signal (Front Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-15 (WFR+) - M2-3 (GND) |
LA-R - W-B |
Sound signal (Woofer) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-16 (+B2) - M2-3 (GND) |
B - W-B |
Power source (+B2) |
Ignition switch off |
11 to 14 V |
|
M2-18 (GND2) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
M2-23 (WFL-) - M2-3 (GND) |
LA-L - W-B |
Sound signal (Woofer) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-24 (FR-) - M2-3 (GND) |
LA-L - W-B |
Sound signal (Front Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-25 (TWL-) - M2-3 (GND) |
LA-LG - W-B |
Sound signal (Front Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-26 (RL-) - M2-3 (GND) |
LA-LG - W-B |
Sound signal (Rear Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-27 (RR-) - M2-3 (GND) |
LA-LG - W-B |
Sound signal (Rear Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-28 (TWR-) - M2-3 (GND) |
LA-GR - W-B |
Sound signal (Front Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-29 (FL-) - M2-3 (GND) |
LA-LG - W-B |
Sound signal (Front Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M2-30 (WFR-) - M2-3 (GND) |
LA-L - W-B |
Sound signal (Woofer) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M3-1 (MUTE) - M2-3 (GND) |
BE - W-B |
Mute signal |
Ignition switch ON Audio system playing |
2.0 V or higher |
|
Audio system changing modes |
Below 1 V |
|||
|
M3-2 (L-) - M2-3 (GND) |
G - W-B |
Sound signal (Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M3-3 (L+) - M2-3 (GND) |
B - W-B |
Sound signal (Left) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M3-4 (R-) - M2-3 (GND) |
R - W-B |
Sound signal (Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M3-5 (R+) - M2-3 (GND) |
W - W-B |
Sound signal (Right) |
Audio system playing |
A waveform synchronized with sound signals is output |
|
M3-6 (SLD) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
M3-7 (TX-) |
W |
AVC-LAN communication signal |
- |
- |
|
M3-8 (TX+) |
B |
AVC-LAN communication signal |
- |
- |
|
M3-11 (SPD) - M2-3 (GND) |
L - W-B |
Vehicle speed signal |
Ignition switch ON Wheel being rotated |
Pulse generation |
|
M3-12 (ACC) - M2-3 (GND) |
LG - W-B |
Power source (ACC) |
Ignition switch off |
Below 1 V |
|
Ignition switch ACC |
11 to 14 V |
|||
|
M3-14 (II1-) - M2-3 (GND) |
BR - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with voice signals is output |
|
M3-15 (II1+) - M2-3 (GND) |
Y - W-B |
Voice signal |
Voice guidance sounding |
A waveform synchronized with voice signals is output |
|
M3-18 (SLD1) - Body ground |
Shielded - Body ground |
Shield ground |
Always |
Below 1 Ω |
|
M3-24 (TMUT) - Body ground |
GR - Body ground |
Mute signal |
Ignition switch ON Audio system playing |
2.0 V or higher |
|
Emergency call mode |
Below 1 V |
DCM (TELEMATICS TRANSCEIVER)
Click here
![2020 - 2021 MY RAV4 RAV4 HV [10/2019 - 12/2021]; CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: TERMINALS OF ECU](/t3Portal/stylegraphics/info.gif)
COMBINATION METER ASSEMBLY
Click here
|
|