Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001HNBY
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [02/2019 - 08/2020]
Title: THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Entry Function, HV Model): CUSTOMIZE PARAMETERS; 2019 - 2020 MY RAV4 HV [02/2019 - 08/2020]

CUSTOMIZE PARAMETERS

CUSTOMIZE SMART KEY SYSTEM (for Entry Function)

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Smart Key / Access.

(5) Select the setting by referring to the table below.

Smart Key / Access

Tester Display

Description

Default

Setting

ECU

Park Wait Time

Function that sets the period of time (lock confirmation time) that the door is prevented from being unlocked by operating the front door outside handle assembly or rear door outside handle assembly*1 after an entry lock operation is performed.

2.5s

00:0.5s,01:1.5s,10:2.5s,11:5s

Certification ECU (Smart key ECU assembly)

Ignition Available Area

Function that sets the area that the key must be in before the power switch can be operated.

All

00:Front,01:All

Certification ECU (Smart key ECU assembly)

Back Door Opening Operation

Function that sets the back door when the user is carrying the electrical key transmitter sub-assembly and presses the back door opener switch assembly (unlock switch).

Long

00:Long,01:Twice,10:OFF

Certification ECU (Smart key ECU assembly)

Door Unlock Mode2

Function that sets which doors are unlocked by the entry unlock function.

All or Driver*2

0:All,1:Driver

Certification ECU (Smart key ECU assembly)

Touch Activation Over Threshold

Function that limits the number of times the entry lock function can be operated consecutively. When set to Not Active entry lock function can be operated an unlimited number of times consecutively.

Active

0:Active,1:Not Active

Certification ECU (Smart key ECU assembly)

Engine Start Indicator

Function that turns the entry warning light on the combination meter assembly on or off.

ON

0:OFF,1:ON

Certification ECU (Smart key ECU assembly)

Door Unlock Sensor Touch Time Adjust

Function that sets the length of time the unlock sensor on the door outside handle assembly LH must be touched to unlock all of the doors

OFF or Middle*2

00:OFF,01:Short,10:Middle,11:Long

Certification ECU (Smart key ECU assembly)

  • *1: w/ Rear Door Entry
  • *2: Default setting differs depending on the country.

(6) Enter the following menus: Customize Setting / Warning.

Warning

Tester Display

Description

Default

Setting

ECU

Key Low Battery Warning

Enables or disables the sounding of the buzzer when the transmitter battery is low and the power switch is turned off after being on (IG) for 20 minutes or more.

ON

0:OFF,1:ON

Certification ECU (Smart key ECU assembly)

(7) Enter the following menus: Customize Setting / PSD & PBD operation. (w/ Hands Free Power Back Door)

PSD & PBD operation

Tester Display

Description

Default

Setting

ECU

Kick Sensor Function

Function that enables/disables the hands free power back door

ON

0:OFF,1:ON

Multiplex network door ECU

Kick Sensor Operation with ACC ON

Status of the hands free power back door function with power switch on (ACC).

Available

0:Available,1:Not Available

Multiplex network door ECU

CUSTOMIZING WITH THE MULTI-DISPLAY

(a) Customizing with the multi-display

(1) Turn the power switch on (IG).

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Door lock settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Select doors to unlock

Function that sets which doors are unlocked by the entry unlock function.

All or Driver*

All Doors or Driver's Door

Certification ECU (Smart key ECU assembly)

  • *: Default setting differs depending on the country.

CUSTOMIZING WITH THE COMBINATION METER ASSEMBLY (w/ Hands Free Power Back Door)

(a) Customizing with the combination meter assembly

(1) Turn the power switch on (IG).

(2) Enter the following menus: Settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Kick Sensor

Function that can be used to set the hands free power back door.

On

On or Off

Multiplex network door ECU

ENTRY UNLOCK MODE CHANGE FUNCTION

(a) Entry unlock mode change function (manual operation)

(1) The following entry unlock modes can be selected when using the entry unlock mode change function.

  • All door unlock mode:
    • When the depression on a door outside handle sub-assembly is touched, all of the doors are unlocked simultaneously.
  • Driver door unlock mode:
    • When the depression on the door outside handle sub-assembly LH is pressed, only the driver door is unlocked. Then, when the depression on the door outside handle sub-assembly LH is pressed again, all of the doors are unlocked.
    • When the depression on the door outside handle sub-assembly RH is pressed, all of the doors are unlocked simultaneously.

(2) When customizing through manual operation:

  1. Turn the power switch off.
  2. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more while the electrical key transmitter sub-assembly is in the exterior detection area.
  3. Check the current setting.

    HINT:

    • The mode switches between all door unlock mode and driver door unlock mode.
    • The answer-back (wireless buzzer, buzzer in the combination meter assembly) operation for each mode is indicated in the table below.
  4. Release the lock and unlock switches of the electrical key transmitter sub-assembly.
  5. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more to change the mode.

    HINT:

    • Repeat the procedure as necessary to select the desired mode.
    • When changing the mode consecutively, make sure to perform the operation 5 seconds after the previous operation.
  6. Unlock the doors using the wireless function, and then open any door.

ENTRY CANCEL FUNCTION

(a) Entry cancel function (manual operation)

HINT:

While the smart key system is canceled, it is possible to lock and unlock the doors with the wireless function, and the engine can be started by holding the electrical key transmitter sub-assembly near the power switch.

(1) The following functions are disabled when the smart key system is canceled.

  1. Entry unlock/lock functions
  2. Push-button start function
  3. Key lock-in prevention function
  4. Entry warning functions

(2) When canceling the smart key system through manual operation:

  1. Make sure the following conditions are met:
    • The power switch is off.
    • The driver door is closed.
    • The driver door is unlocked.

(3) Press the unlock switch of the electrical key transmitter sub-assembly.

(4) Open the driver door within 5 seconds of completing the step above (driver door: closed → opened).

(5) With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

NOTICE:

If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

(6) Perform the following procedure within 30 seconds of completing the step above.

  1. Close and open the driver door twice (driver door: open → closed → opened → closed → opened).
  2. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.

    NOTICE:

    If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

  3. Close and open the driver door (driver door: open → closed → opened).

(7) Close the driver door within 5 seconds (driver door: open → closed).

(8) Check that the buzzer sounds twice (short beeps) to confirm that the smart key system has been canceled.

(9) Perform the following procedure to restore the smart key system to the active state from the canceled state.

  1. Perform the procedure to cancel the smart key system again.
  2. Check that the buzzer sounds once (short beep) to confirm that the smart key system has been restored to the active state.

    HINT:

    • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
    • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.