HINT:

• If the wireless door lock control system does not operate, make sure that the wireless door lock control system is not turned off through a customize setting.
• The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock control system is operating properly. Check the power door lock control system first before troubleshooting the wireless door lock control system. Use this procedure to troubleshoot the wireless door lock control system.
• If 2 or more door control transmitter module set sub-assemblies are registered to the system, make sure to perform troubleshooting with all of them.
• *: Use the Techstream.

HINT:

• In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
• Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
• The following 5 items are important points for problem analysis:

  What	Vehicle model, system name
  When	Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time
  Where	Whether the problem occurs at a specific location
  Under what conditions?	Whether the doors were locked or unlocked, whether the ignition switch was ON, whether the engine has started
  How did it happen?	Problem symptoms

HINT:

• A simple method to determine whether the auxiliary battery is depleted is to operate the horn.
• If the auxiliary battery voltage is below 11 V, recharge or replace the auxiliary battery