Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001HG8F
Model Year Start: 2019 Model: RAV4 Prod Date Range: [02/2019 - 12/2021]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C1203; ECM Communication Circuit; 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]

DTC

C1203

ECM Communication Circuit

DESCRIPTION

This circuit is used to send TRC (TRAC) and VSC information from the skid control ECU (brake booster with master cylinder assembly) to the hybrid vehicle control ECU assembly, and hybrid control system information from the hybrid vehicle control ECU assembly to the skid control ECU (brake booster with master cylinder assembly) via CAN communication.

Identification information sent from other ECUs is stored when the vehicle is shipped from the factory and used as the default values.

NOTICE:

DTC C1203 is output when an incorrect ECU is installed. If initialization is performed and learning occurs with an incorrect ECU installed, operations and functions will differ from those stored when the vehicle was shipped from the factory. Therefore, make sure that learning occurs properly.

DTC No.

Detection Item

INF Code

DTC Detection Condition

Trouble Area

Note

C1203

ECM Communication Circuit

-

Either of the following is detected:

  1. Identification information sent from other ECUs does not match with the value stored when shipped from the factory.
  2. No stored information for destination.
  • The wrong ECU or sensor was installed
  • Skid control ECU (Brake booster with master cylinder assembly)

-

DTC Detection Conditions: C1203

 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

-

-

-

Malfunction Status

Identification information sent from other ECUs does not match with the value stored when shipped from the factory

-

No stored information for destination

-

Detection Time

-

-

Number of Trips

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.

    Click here 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY

  • When replacing the yaw rate and acceleration sensor (airbag ECU assembly), perform zero point calibration.

    Click here 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY

  • Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).

    If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.

    Click here 2019 MY RAV4 HV [11/2018 - 10/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION 2020 - 2021 MY RAV4 HV [10/2019 - 12/2021]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION

PROCEDURE

1.

CHECK PART NUMBER

(a) Check that the proper hybrid vehicle control ECU assembly, main body ECU (multiplex network body ECU) and yaw rate and acceleration sensor (airbag ECU assembly) are installed.

OK:

Proper ECUs and sensor are installed.

(b) Check if the hybrid vehicle control ECU assembly, main body ECU (multiplex network body ECU) and yaw rate and acceleration sensor (airbag ECU assembly) were replaced before the DTC was recorded.

OK:

ECU or sensor was not replaced.

Result

Proceed to

OK

A

NG (A proper hybrid vehicle control ECU assembly is not installed and/or the hybrid vehicle control ECU assembly was replaced.)

B

NG (A proper main body ECU (multiplex network body ECU) is not installed and/or the main body ECU (multiplex network body ECU) was replaced.)

C

NG (A proper yaw rate and acceleration sensor (airbag ECU assembly) is not installed and/or the yaw rate and acceleration sensor (airbag ECU assembly) was replaced.)

D

B

REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY 2019 MY RAV4 HV [02/2019 - 10/2019]; HYBRID / BATTERY CONTROL: HYBRID VEHICLE CONTROL ECU: REMOVAL 2020 MY RAV4 HV [10/2019 - 08/2020]; HYBRID / BATTERY CONTROL: HYBRID VEHICLE CONTROL ECU: REMOVAL 2021 MY RAV4 HV [08/2020 - 12/2021]; HYBRID / BATTERY CONTROL: HYBRID VEHICLE CONTROL ECU: REMOVAL

C

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL 2020 MY RAV4 RAV4 HV [10/2019 - 08/2020]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL

D

REPLACE AIRBAG ECU ASSEMBLY 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL 2020 MY RAV4 RAV4 HV [10/2019 - 08/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

A

2.

PERFORM INITIALIZATION AND CALIBRATION OF LINEAR SOLENOID VALVE

(a) Perform initialization and calibration of the linear solenoid valve.

Click here 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY

Chassis > ABS/VSC/TRAC > Utility

Tester Display

ECB Utility

HINT:

Before performing initialization and calibration of the linear solenoid valve, DTC C1203 will be output.

NEXT

3.

RECONFIRM DTC

(a) Turn the ignition switch off.

(b) Clear the DTCs.

Click here 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): DTC CHECK / CLEAR

Chassis > ABS/VSC/TRAC > Clear DTCs

(c) Turn the ignition switch off.

(d) Turn the ignition switch to ON.

(e) Check if the same DTC is output.

Click here 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): DTC CHECK / CLEAR

Chassis > ABS/VSC/TRAC > Trouble Codes

Result

Proceed to

DTC C1203 is output.

A

DTC C1203 is not output.

B

A

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; BRAKE SYSTEM (OTHER): BRAKE BOOSTER (w/o Vacuum Brake Booster): REMOVAL 2020 MY RAV4 RAV4 HV [10/2019 - 08/2020]; BRAKE SYSTEM (OTHER): BRAKE BOOSTER (w/o Vacuum Brake Booster): REMOVAL 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; BRAKE SYSTEM (OTHER): BRAKE BOOSTER (w/o Vacuum Brake Booster): REMOVAL

B

END