Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HCET |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [02/2019 -
] |
Title: WIPER / WASHER: WASHER LEVEL WARNING SWITCH: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [02/2019 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the level warning switch assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Front bumper assembly (Including removal and installation)
|
Front television camera view adjustment
|
Panoramic view monitor system (for HV model)
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Front bumper assembly (Including removal and installation)
|
Front television camera view adjustment
|
Panoramic view monitor system (for Gasoline model)
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
2. DRAIN WASHER FLUID
Click here
3. REMOVE LEVEL WARNING SWITCH ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction
|
(b) Remove the level warning switch assembly as shown in the illustration.
|