Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001HCAK
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [02/2019 - 08/2020]
Title: P710 (HYBRID TRANSMISSION / TRANSAXLE): MOTOR CABLE: INSTALLATION; 2019 - 2020 MY RAV4 HV [02/2019 - 08/2020]

INSTALLATION

PROCEDURE

1. INSTALL MOTOR CABLE

CAUTION:

Be sure to wear insulated gloves.

(a) Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
  • Do not touch the waterproof seal or terminals of the motor cable.

(b) Attach the 2 claws to install a new terminal cap to the hybrid vehicle transaxle assembly.

NOTICE:

  • Keep the terminal cap and its installation area free from foreign matter, water, etc.
  • Do not pinch the O-ring.
  • Check that the terminal cap is securely installed.

(c) Temporarily install the connector cover to the hybrid vehicle transaxle assembly with the 2 bolts.

(d) Tighten the 2 bolts to install the connector cover.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL INVERTER WITH CONVERTER ASSEMBLY

  • for 2WD:

    Click here 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER (for 2WD): INSTALLATION

  • for AWD:

    Click here 2019 - 2020 MY RAV4 HV [02/2019 - 06/2020]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER (for AWD): INSTALLATION 2020 - 2024 MY RAV4 HV [06/2020 -        ]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER (for AWD): INSTALLATION