| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001H9BD |
| Model Year Start: 2019 | Model: RAV4 HV | Prod Date Range: [02/2019 - 08/2020] |
| Title: A25A-FXS (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2019 - 2020 MY RAV4 HV [02/2019 - 08/2020] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
-
w/ Canister Pump Module:
Click here
![2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/ Canister Pump Module): INITIALIZATION](/t3Portal/stylegraphics/info.gif)
-
w/o Canister Pump Module:
Click here
PROCEDURE
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
-
w/ Canister Pump Module:
Click here
-
w/o Canister Pump Module:
Click here
(a) Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
(b) Insert the engine coolant temperature sensor to the end of the water outlet and secure it with a new clip.
NOTICE:
- If the engine coolant temperature sensor has been struck or dropped, replace it.
- If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL INVERTER WITH CONVERTER ASSEMBLY
-
for 2WD:
Click here
-
for AWD:
Click here
3. INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/ Grille Shutter)
(a) Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.
(b) Install the No. 2 engine coolant temperature sensor to the water outlet with a new clip.
NOTICE:
- If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
- If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.
(c) Connect the No. 2 engine coolant temperature sensor connector.
4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (w/ Grille Shutter)
Click here
5. INSTALL INLET AIR CLEANER ASSEMBLY (w/ Grille Shutter)
Click here
6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Grille Shutter)
Click here
7. ADD ENGINE COOLANT
Click here
8. INSPECT FOR COOLANT LEAK
Click here
|
|