| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001H6WP |
| Model Year Start: 2019 | Model: RAV4 HV | Prod Date Range: [02/2019 - 12/2021] |
| Title: A25A-FXS (EMISSION CONTROL): FUEL VAPOR CONTAINMENT VALVE (w/ Canister Pump Module): REMOVAL; 2019 - 2021 MY RAV4 HV [02/2019 - 12/2021] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT FLOOR COVER LH
Click here
![2019 MY RAV4 HV [02/2019 - 10/2019]; A25A-FXS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT CENTER FLOOR COVER
Click here
3. REMOVE FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)
|
(a) Disconnect the fuel vapor containment valve (fuel tank solenoid main valve assembly) connector. |
|
(b) Disconnect the fuel tank vent hose sub-assembly from the fuel vapor containment valve (fuel tank solenoid main valve assembly).
|
*1 |
Fuel Tank Vent Hose Sub-assembly |
*2 |
Pipe (Fuel Vapor Containment Valve (Fuel Tank Solenoid Main Valve Assembly)) |
|
*a |
Retainer |
*b |
Tab |
|
*c |
Tube Connector |
*d |
O-ring |
|
Pinch |
|
Pull |
|
Pull off |
- |
- |
NOTICE:
- Remove any dirt or foreign matter on the tube connectors before performing this work.
- Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the tube connectors has an O-ring that seals the pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)).
- Perform this work by hand. Do not use any tools.
- Do not forcibly bend, twist or turn the fuel tank vent hose sub-assembly.
- Protect the disconnected parts by covering them with plastic bags after disconnecting the fuel tank vent hose sub-assembly.
- If the tube connector and pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)) are stuck, push and pull to release them.
HINT:
Do not remove the retainer.
(1) Pinch the tabs of the retainer to disengage the lock claws and pull it down.
(2) Pull off the fuel tank vent hose sub-assembly.
(c) Disconnect the fuel tank vent hose from the fuel vapor containment valve (fuel tank solenoid main valve assembly).
|
*1 |
Fuel Tank Vent Hose |
*2 |
Pipe (Fuel Vapor Containment Valve (Fuel Tank Solenoid Main Valve Assembly)) |
|
*a |
Retainer |
*b |
Tab |
|
*c |
Tube Connector |
*d |
O-ring |
|
|
Pinch |
|
Pull |
|
|
Pull off |
- |
- |
NOTICE:
- Remove any dirt or foreign matter on the tube connectors before performing this work.
- Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the tube connectors has an O-ring that seals the pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)).
- Perform this work by hand. Do not use any tools.
- Do not forcibly bend, twist or turn the fuel tank vent hose.
- Protect the disconnected parts by covering them with plastic bags after disconnecting the fuel tank vent hose.
- If the tube connector and pipe (fuel vapor containment valve (fuel tank solenoid main valve assembly)) are stuck, push and pull to release them.
HINT:
Do not remove the retainer.
(1) Pinch the tabs of the retainer to disengage the lock claws and pull it down.
(2) Pull off the fuel tank vent hose.
|
(d) Remove the 2 bolts and fuel vapor containment valve (fuel tank solenoid main valve assembly) from the vehicle body. |
|
|
|