Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001H4ZA
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [02/2019 - 08/2020]
Title: A25A-FXS (INTAKE / EXHAUST): EXHAUST PIPE: REMOVAL; 2019 - 2020 MY RAV4 HV [02/2019 - 08/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front exhaust pipe assembly and tail exhaust pipe assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

  • Replacement of air fuel ratio sensor
  • Gas leak from exhaust system is repaired

Inspection After Repair

  • Poor idle, etc.
  • Engine start function, etc.

2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/ Canister Pump Module): INITIALIZATION 2020 MY RAV4 RAV4 HV [10/2019 - 08/2020]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/ Canister Pump Module): INITIALIZATION (w/ Canister Pump Module)

2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/o Canister Pump Module): INITIALIZATION (w/o Canister Pump Module)

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

PROCEDURE

1. REMOVE TAIL EXHAUST PIPE ASSEMBLY

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

(a) Remove the 2 bolts and disconnect the tail exhaust pipe assembly from the front exhaust pipe assembly.

(b) Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

(c) Remove the gasket from the front exhaust pipe assembly.

2. REMOVE AIR FUEL RATIO SENSOR (for Sensor 2)

Click here 2019 - 2020 MY RAV4 HV [02/2019 - 08/2020]; A25A-FXS (ENGINE CONTROL): AIR FUEL RATIO SENSOR: REMOVAL+

3. REMOVE FRONT EXHAUST PIPE ASSEMBLY

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

(a) Remove the 2 nuts and disconnect the front exhaust pipe assembly from the exhaust manifold.

(b) Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

(c) Remove the gasket from the front exhaust pipe assembly.

4. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY

HINT:

  • Perform this procedure only when replacement of the tail exhaust pipe baffle sub-assembly is necessary.
  • If the tail exhaust pipe baffle sub-assembly is removed, replace it with a new one.

(a) Remove the 2 tail exhaust pipe baffle sub-assemblies.

5. REMOVE NO. 2 EXHAUST PIPE SUPPORT BRACKET

Click here 2019 MY RAV4 HV [02/2019 - 10/2019]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER (for HV Model): REMOVAL+ 2020 MY RAV4 HV [10/2019 - 08/2020]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER (for HV Model): REMOVAL+

6. REMOVE NO. 3 EXHAUST PIPE SUPPORT BRACKET

(a) Remove the exhaust pipe support from the No. 3 exhaust pipe support bracket.

(b) Remove the 2 bolts and No. 3 exhaust pipe support bracket from the body.

7. REMOVE NO. 6 EXHAUST PIPE SUPPORT BRACKET

(a) Remove the exhaust pipe support from the No. 6 exhaust pipe support bracket.

(b) Remove the 2 bolts and No. 6 exhaust pipe support bracket from the body.

8. REMOVE NO. 7 EXHAUST PIPE SUPPORT BRACKET

(a) Remove the exhaust pipe support from the No. 7 exhaust pipe support bracket.

(b) Remove the 2 bolts and No. 7 exhaust pipe support bracket from the body.