| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001H3X6 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [02/2019 - 12/2021] |
| Title: LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): B2450; Height Sensor Initialization Incomplete; 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021] | ||
|
DTC |
B2450 |
Height Sensor Initialization Incomplete |
DESCRIPTION
The headlight ECU sub-assembly LH stores this DTC if initialization has not been performed after it was replaced.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
Note |
|---|---|---|---|---|---|
|
B2450 |
Height Sensor Initialization Incomplete |
Detection condition:
Malfunction status:
Malfunction duration:
|
Headlight ECU sub-assembly LH |
AFS |
- |
CAUTION / NOTICE / HINT
NOTICE:
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
Click here
![2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
INITIALIZATION HEADLIGHT ECU SUB-ASSEMBLY LH |
(a) Perform initialization of the headlight ECU sub-assembly LH.
Click here
|
|
2. |
CLEAR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS / Clear DTCs.
(e) Clear the DTCs.
Body Electrical > AFS > Clear DTCs
|
|
3. |
CHECK FOR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.
(e) Check for DTCs.
Body Electrical > AFS > Trouble Codes
OK:
DTC B2450 is not output.
HINT:
If the headlight ECU sub-assembly LH stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight ECU sub-assembly LH.
| OK |
|
END (INITIALIZATION WAS NOT COMPLETED) |
| NG |
|
|
|