Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G2C2 |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 12/2021] |
Title: LIGHTING (EXT): LIGHTING SYSTEM (w/ Headlight ECU without AFS): B2456; Left Headlight ECU Variation Error; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] |
DTC
|
B2456
|
Left Headlight ECU Variation Error
|
DESCRIPTION
This DTC is stored if the headlight ECU sub-assembly LH for another destination is installed.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
Note
|
B2456
|
Left Headlight ECU Variation Error
|
Detection condition:
-
The ignition switch is ON
Malfunction status:
-
Vehicle specification information received via CAN communication is continuously mismatched
|
-
Hybrid vehicle control ECU assembly (for HV Model)
-
ECM (for Gasoline Model)
-
Main body ECU (multiplex network body ECU)
-
Headlight ECU sub-assembly LH
|
HL AutoLeveling
|
-
|
CAUTION / NOTICE / HINT
NOTICE:
-
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
Click here
-
w/ Smart Key System:
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
-
for HV Model:
Before replacing the hybrid vehicle control ECU assembly, refer to Registration.
-
for Gasoline Model:
Before replacing the ECM, refer to Registration.
PROCEDURE
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling / Clear DTCs.
(e) Clear the DTCs.
Body Electrical > HL AutoLeveling > Clear DTCs
NEXT
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
(e) Check for DTCs.
Body Electrical > HL AutoLeveling > Trouble Codes
OK:
DTC B2456 is not output.
NG (for HV Model)
|
|
|
3.
|
CHECK HYBRID VEHICLE CONTROL ECU ASSEMBLY
|
(a) Check if the part number of the hybrid vehicle control ECU assembly installed to the vehicle is correct.
OK:
Part number is correct.
OK
|
|
|
4.
|
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
|
(a) Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.
OK:
Part number is correct.
(a) Check if the part number of the ECM installed to the vehicle is correct.
OK:
Part number is correct.
|