Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G238 |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: THEFT DETERRENT / KEYLESS ENTRY: IMMOBILISER SYSTEM (for Gasoline Model without Smart Key System): B2795; Unmatched Key Code; 2019 - 2024 MY RAV4 [11/2018 - ] |
DTC
|
B2795
|
Unmatched Key Code
|
DESCRIPTION
This DTC is stored when a door control transmitter assembly with a different vehicle serial number is inserted into the ignition key cylinder.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Note
|
B2795
|
Unmatched Key Code
|
A door control transmitter assembly with a different vehicle serial number is inserted into the ignition key cylinder (1 trip detection logic*).
|
-
Door control transmitter assembly
-
Transponder key ECU assembly
|
DTC Output Confirmation Operation:
-
Insert the door control transmitter assembly into the ignition key cylinder.
|
-
*: Only output while a malfunction is present.
Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected
|
Fail-safe Operation when Malfunction Detected
|
Engine cannot be started
|
-
|
Related Data List and Active Test Items
DTC No.
|
Data List and Active Test
|
B2795
|
-
|
CAUTION / NOTICE / HINT
NOTICE:
-
Before replacing the transponder key ECU assembly or door control transmitter assembly, refer to the Registration.
Click here
-
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
PROCEDURE
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > Immobiliser > Clear DTCs
NEXT
|
|
|
(a) Perform "DTC Output Confirmation Operation" procedure.
(b) Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
(c) Check for DTCs.
Body Electrical > Immobiliser > Trouble Codes
HINT:
If DTC B2795 is stored, check for DTCs with the next door control transmitter assembly after clearing the DTCs.
OK:
DTC B2795 is not output.
Result
|
Proceed to
|
B2795 is not output
|
A
|
DTC B2795 is output for all of the door control transmitter assemblies
|
B
|
DTC B2795 is output for any of the door control transmitter assemblies
|
C
|
C
|
|
|
3.
|
CHECK OPERATION (IG ON)
|
(a) Check that the ignition switch can be turned to ON using the door control transmitter assembly for which the DTC was stored.
OK:
Ignition switch can be turned to ON using the door control transmitter assembly (for which the DTC was stored).
NG |
|
REPLACE DOOR CONTROL TRANSMITTER ASSEMBLY THAT DTC IS OUTPUT
|
OK
|
|
|
(a) Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
(b) Clear the DTCs.
Body Electrical > Immobiliser > Clear DTCs
(c) Reregister the key ID code with the transponder key ECU assembly.
Click here
OK:
Registration procedure can be completed.
OK |
|
END (DOOR CONTROL TRANSMITTER ASSEMBLY REGISTRATION FAILURE)
|
NG |
|
REPLACE DOOR CONTROL TRANSMITTER ASSEMBLY
|
|