| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001G0QH |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for A25A-FKS): ON-VEHICLE INSPECTION; 2019 - 2024 MY RAV4 [11/2018 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. OPERATION CHECK
(a) Disconnect No. 1 vacuum hose connector.
Click here
![2019 - 2024 MY RAV4 [11/2018 - ]; BRAKE SYSTEM (OTHER): VACUUM PUMP (for A25A-FKS): REMOVAL+](/t3Portal/stylegraphics/info.gif)
|
(b) Connect the hose of the vacuum gauge to the vacuum pump assembly. |
|
(c) Start the engine and warm it up for more than 2 minutes.
(d) With the engine idling, check the vacuum of the vacuum pump assembly.
Standard Pressure:
More than 86.7 kPa (650 mmHg, 25.6 in.Hg)
HINT:
- If the pressure is less than the standard, replace the vacuum pump assembly.
- Always perform this operation check procedure after replacing the vacuum pump assembly.
(e) Remove the vacuum gauge from the vacuum pump assembly.
(f) Connect No. 1 vacuum hose connector.
Click here
|
|