Last Modified: 06-02-2026 6.11:8.1.0 Doc ID: RM100000001G0P0
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE HOLD SWITCH: INSPECTION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (BRAKE HOLD SWITCH)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

15 (E) - 24 (+B)

Switch pushed

Below 1 Ω

15 (E) - 24 (+B)

Switch not pushed

10 kΩ or higher

HINT:

If the result is not as specified, replace the integration control and panel assembly (brake hold switch).

*a

Component without harness connected

Integration Control and Panel Assembly

(Brake Hold Switch)