Last Modified: 06-02-2026 6.11:8.1.0 Doc ID: RM100000001G0OV
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: INSPECTION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT VSC OFF SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Switch Condition

Specified Condition

5 (+) - 2 (E)

Pushed

Below 1 Ω

Not pushed

10 kΩ or higher

If the result is not as specified, replace the VSC OFF switch.

*a

Component without harness connected

VSC OFF Switch)

(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the VSC OFF switch.

OK

Measurement Condition

Specified Condition

Battery positive (+) → 6 (ILL+)

Battery negative (-) → 1 (ILL-)

Illuminates

If the result is not as specified, replace the VSC OFF switch.

*a

Component without harness connected

(VSC OFF Switch)