| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001G0OO |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 02/2019] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: REAR SPEED SENSOR (for AWD): INSTALLATION; 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR SKID CONTROL SENSOR LH
(a) Install the rear skid control sensor LH to the rear axle carrier sub-assembly with the bolt.
Torque:
:
8.5 N·m {87 kgf·cm, 75 in·lbf}
NOTICE:
- Keep the tip of the rear skid control sensor LH and installation hole free of foreign matter.
- Firmly insert the rear skid control sensor body into the rear axle carrier sub-assembly before tightening the bolt.
- After installing the rear skid control sensor to the rear axle carrier sub-assembly, make sure that there is no clearance between the rear skid control sensor stay and rear axle carrier sub-assembly. Also make sure that no foreign matter is stuck between the parts.
(b) Connect the skid control sensor connector to the skid control sensor LH.
2. INSTALL REAR WHEEL
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. CHECK FOR SPEED SENSOR SIGNAL
Click here
|
|