| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FQF9 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 02/2019] |
| Title: SEAT BELT: SEAT BELT WARNING SYSTEM (w/ Occupant Classification System): DATA LIST / ACTIVE TEST; 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019] | ||
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag, Occupant Detection, Combination Meter or Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > SRS Airbag > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Left side Buckle SW |
LH buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
|
Right side Buckle SW |
RH buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
Body Electrical > Occupant Detection > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Passenger Buckle SW |
Front passenger buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
Body Electrical > Combination Meter > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Rear Right Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner belt buckle signal |
ON or OFF |
OFF: Rear RH seat belt fastened ON: Rear RH seat belt not fastened |
w/ Rear Seat Belt Warning System |
|
Rear Left Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt LH (for LH) buckle signal |
ON or OFF |
OFF: Rear LH seat belt (for LH) fastened ON: Rear LH seat belt (for LH) not fastened |
w/ Rear Seat Belt Warning System |
|
Rear Center Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt LH (for Center) buckle signal |
ON or OFF |
OFF: Rear LH seat belt (for Center) fastened ON: Rear LH seat belt (for Center) not fastened |
w/ Rear Seat Belt Warning System |
|
Driver Seatbelt Warning Buzzer Function |
Driver seat belt warning buzzer |
ON or OFF |
Customized setting displayed |
- |
|
Passenger Seatbelt Warning Buzzer Function |
Front passenger seat belt warning buzzer |
ON or OFF |
Customized setting displayed |
- |
|
Rear Right Seatbelt Warning Buzzer Function |
Rear RH seat belt warning buzzer |
ON or OFF |
Customized setting displayed |
w/ Rear Seat Belt Warning System |
|
Rear Left Seatbelt Warning Buzzer Function |
Rear LH seat belt warning buzzer |
ON or OFF |
Customized setting displayed |
w/ Rear Seat Belt Warning System |
|
Rear Center Seatbelt Warning Buzzer Function |
Rear center seat belt warning buzzer |
ON or OFF |
Customized setting displayed |
w/ Rear Seat Belt Warning System |
Body Electrical > Main Body > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
RR Door Courtesy SW |
Rear door courtesy light switch assembly RH signal |
ON or OFF |
ON: Rear door RH open OFF: Rear door RH closed |
- |
|
RL Door Courtesy SW |
Rear door courtesy light switch assembly LH signal |
ON or OFF |
ON: Rear door LH open OFF: Rear door LH closed |
- |
ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Combination Meter > Active Test
|
Tester Display |
Measurement Item |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Buzzer Operation (800Hz, Vol L, W/ Damping) |
Combination meter buzzer
|
ON |
- |
|
Buzzer Operation (800Hz, Vol L, W/O Damping) |
Combination meter buzzer
|
ON |
- |
|
Buzzer Operation (800Hz, Vol S, W/ Damping) |
Combination meter buzzer
|
ON |
- |
|
Buzzer Operation (800Hz, Vol S, W/O Damping) |
Combination meter buzzer
|
ON |
- |
|
Driver Side Seat Belt Warning |
Driver side seat belt warning light |
OFF/ON |
- |
|
Passenger Side Seat Belt Warning |
Front passenger side seat belt warning light |
OFF/ON |
Not applicable to this vehicle |
|
|