| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FPIR |
| Model Year Start: 2019 | Model: RAV4 HV | Prod Date Range: [11/2018 - 10/2022] |
| Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): C2A63; Back Camera Internal Circuit; 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022] | ||
|
DTC |
C2A63 |
Back Camera Internal Circuit |
DESCRIPTION
This DTC is stored when the parking assist ECU detects a signal indicating a malfunction in the television camera assembly via CAN communication.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C2A63 |
Back Camera Internal Circuit |
A signal indicating a malfunction in the television camera assembly RH is detected. |
Television camera assembly |
CAUTION / NOTICE / HINT
NOTICE:
-
When "!" mark is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.
Click here
![2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)
-
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
Click here
PROCEDURE
|
1. |
CHECK FOR DTC |
(a) Clear the DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK:
DTC C2A63 is not output.
| OK |
|
END |
| NG |
|
|
|