Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FPIP
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [11/2018 - 10/2022]
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): C1694; Steering Angle Initialization Incomplete; 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]

DTC

C1694

Steering Angle Initialization Incomplete

DESCRIPTION

This DTC is stored when the parking assist ECU judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1694

Steering Angle Initialization Incomplete

Maximum steering angle has not been memorized

  • Steering angle setting
  • Parking assist ECU

CAUTION / NOTICE / HINT

NOTICE:

  • When "!" mark is displayed on the parking assist ECU after disconnecting the cable from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

    Click here 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): CALIBRATION

PROCEDURE

1.

PERFORM SETTINGS (STEERING ANGLE SETTING)

(a) Perform the following procedure depending on the memory conditions to register the vehicle information to the parking assist ECU.

(1) Refer to steering angle setting.

Click here 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): CALIBRATION

NEXT

2.

CHECK FOR DTC

(a) Clear the DTCs.

Click here 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): DTC CHECK / CLEAR

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs

(b) Check for DTCs.

Click here 2019 - 2022 MY RAV4 HV [11/2018 - 10/2022]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): DTC CHECK / CLEAR

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes

OK:

DTC C1694 is not output.

HINT:

  • If DTC C1694 is output, perform the steering angle setting again.
  • If DTC C1694 is still output after performing the steering angle setting 3 times, replace the parking assist ECU.
OK

END (SETTINGS ARE DEFECTIVE)

NG

REPLACE PARKING ASSIST ECU