Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FPH9
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [11/2018 - 02/2019]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for HV Model): B1472; A/C Inverter High Voltage Output System Malfunction; 2019 MY RAV4 HV [11/2018 - 02/2019]

DTC

B1472

A/C Inverter High Voltage Output System Malfunction

DESCRIPTION

The inverter in the compressor with motor assembly outputs high voltage to operate the motor. If there is an open or short in the output circuit, the hybrid vehicle control ECU assembly will stop compressor operation and store this DTC. This DTC will be stored as a history DTC. The compressor operation remains stopped until both the history and current DTCs are cleared.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B1472

A/C Inverter High Voltage Output System Malfunction

  • Diagnosis condition: Compressor operation
  • Malfunction status: Open or short in A/C inverter high voltage output system
  • Detection time: None
  • Compressor with motor assembly
  • CAN communication system

Memorized

CAUTION / NOTICE / HINT

CAUTION:

  • Wear insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Carry the removed service plug in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.
  • Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.

NOTICE:

  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]; HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY): PRECAUTION

  • The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs from these systems are output simultaneously.

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

(a) Using the Techstream, check if the CAN communication system is functioning normally.

Click here 2019 MY RAV4 HV [11/2018 - 02/2019]; NETWORKING: CAN COMMUNICATION SYSTEM (for HV Model): HOW TO PROCEED WITH TROUBLESHOOTING

Result

Proceed to

CAN communication system DTCs are not output

A

CAN communication system DTCs are output

B

A

REPLACE COMPRESSOR WITH MOTOR ASSEMBLY

B

GO TO CAN COMMUNICATION SYSTEM