| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FOLE |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: PRE-COLLISION: PRE-COLLISION SYSTEM: PROBLEM SYMPTOMS TABLE; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
PROBLEM SYMPTOMS TABLE
NOTICE:
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.
Pre-Collision System
|
Symptom |
Suspected Area |
Link |
|---|---|---|
|
"VSC Turned OFF Pre-Collision Brake System Unavailable" is displayed |
Check whether VSC is off |
- |
|
Electronically controlled brake system (w/ Vacuum Brake Booster) |
|
|
|
Electronically controlled brake system (w/o Vacuum Brake Booster) |
|
|
|
Pre-collision system cannot be canceled (PCS warning light does not illuminate) |
Combination meter assembly (check if indicator illuminates using Active Test) |
|
|
Meter / gauge system |
|
|
|
Steering pad switch assembly |
|
|
|
Combination meter assembly |
|
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster): HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
|
|