| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FNL6 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: C1AA800; Front Recognition Camera Optical Axis Misalignment Malfunction; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
|
DTC |
C1AA800 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
DESCRIPTION
If the forward recognition camera determines that the beam axis of the camera is misaligned, it stores C1AA800.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1AA800 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
While driving at a vehicle speed of 5 km/h (3 mph) or higher after 3 seconds have elapsed since turning the ignition switch to ON, the axis misalignment of the forward recognition camera is detected |
|
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; CRUISE CONTROL: FRONT CAMERA: ADJUSTMENT (ONE TIME RECOGNITION)](/t3Portal/stylegraphics/info.gif)
Sequential Recognition:
Click here
- When replacing the windshield glass equipped with the forward recognition camera, be sure to replace it with a genuine windshield glass for the forward recognition camera. A windshield glass other than a genuine windshield glass for the forward recognition camera does not have a camera installation bracket. Therefore, the forward recognition camera cannot be installed. If the forward recognition camera is mounted on a windshield glass that is not a genuine windshield glass for the forward recognition camera, the forward recognition camera may not operate properly because of the transmittance of the windshield glass and the shape of black ceramic parts.
- The beam axis may become misaligned while driving on circuits or banked roads. If this occurs, driving on normal roads for a while will correct the misalignment.
- The beam axis may become misaligned while driving overloading or when vehicle toe is displaced. If this occurs, re-adjusting the load or adjusting toe-in will correct the misalignment.
PROCEDURE
|
1. |
CHECK FORWARD RECOGNITION CAMERA INSTALLATION |
(a) Check the forward recognition camera installation condition.
HINT:
Replace the windshield glass if there is a malfunction in the installation condition of the forward recognition camera.
OK:
The forward recognition camera installation bracket is neither deformed nor misaligned.
| NG |
|
|
|
2. |
CHECK VEHICLE CONDITION |
(a) Check the vehicle operating condition.
HINT:
Confirm that the beam axis of the camera was not misaligned due to overloading, towing, modification, etc.
OK:
Nothing has caused the beam axis of the camera to be misaligned.
| NG |
|
|
|
3. |
CHECK WHEEL ALIGNMENT |
(a) Check the front and rear wheel alignment (toe).
-
for Front Wheel Alignment:
Click here
-
for Rear Wheel Alignment:
Click here
OK:
Front and rear wheels are not misaligned (toe).
| NG |
|
|
|
4. |
ADJUST FORWARD RECOGNITION CAMERA |
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click here
Sequential Recognition:
Click here
|
|
5. |
CLEAR DTC |
(a) Clear the DTCs.
Click here
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
6. |
ADJUST WHEEL ALIGNMENT |
(a) Check the front and rear wheel alignment (toe).
-
for Front Wheel Alignment:
Click here
-
for Rear Wheel Alignment:
Click here
|
|
7. |
ADJUST FORWARD RECOGNITION CAMERA |
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click here
Sequential Recognition:
Click here
|
|
8. |
CLEAR DTC |
(a) Clear the DTCs.
Click here
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
9. |
ADJUST FORWARD RECOGNITION CAMERA |
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click here
Sequential Recognition:
Click here
|
|
10. |
CLEAR DTC |
(a) Clear the DTCs.
Click here
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
11. |
REPLACE WINDSHIELD GLASS |
(a) Replace the windshield glass.
Click here
|
|
12. |
ADJUST FORWARD RECOGNITION CAMERA |
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click here
Sequential Recognition:
Click here
|
|
13. |
CLEAR DTC |
(a) Clear the DTCs.
Click here
Chassis > Front Recognition Camera > Clear DTCs
| NEXT |
|
END |
|
|