| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001FNKX |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: TERMINALS OF ECU; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
TERMINALS OF ECU
CHECK FORWARD RECOGNITION CAMERA
NOTICE:
- DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
- Do not apply larger loads than necessary since the connector may be damaged.
(a) Measure the voltage and resistance according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P8-7 (IGB) - Body ground |
LA-P - Body ground*1 P - Body ground*2 |
Power source |
Ignition switch ON |
11 to 14 V |
|
Ignition switch off |
Below 1 V |
|||
|
P8-1 (HTR) - Body ground |
B - Body ground |
Forward recognition with heater hood sub-assembly operation signal |
Ignition switch ON, forward recognition with heater hood sub-assembly not operating |
11 to 14 V |
|
Ignition switch ON, forward recognition with heater hood sub-assembly operating |
Below 1 V |
|||
|
P8-10 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
- *1: for TMC Made
- *2: for TMMC Made
|
|