Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FHAR
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [11/2018 - 02/2019]
Title: HYBRID / BATTERY CONTROL: BATTERY COOLING FILTER: INSTALLATION; 2019 MY RAV4 HV [11/2018 - 02/2019]

INSTALLATION

PROCEDURE

1. INSTALL NO. 1 HV BATTERY INTAKE FILTER

(a) Engage the claw to temporarily install the No. 1 HV battery intake filter to the battery service hole cover.

(b) Engage the 5 claws to install the No. 1 HV battery intake filter to the battery service hole cover.

HINT:

Engage the 5 claws in the order of (A), (B).

2. INSTALL BATTERY SERVICE HOLE COVER

(a) Engage the guide and 8 claws.

(b) Install the battery service hole cover with the clip.

3. CLEAR DTC

HINT:

If the message "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, clean or replace the No. 1 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

Click here 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]; HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY): DTC CHECK / CLEAR