| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FAOI |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 08/2020] |
| Title: HEATING / AIR CONDITIONING: COMPRESSOR (for A25A-FKS): REMOVAL; 2019 - 2020 MY RAV4 [11/2018 - 08/2020] | ||
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
Do not race the engine before replacing the compressor assembly with pulley.
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
(a) for HFC-134a (R134a):
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFC-134a(R134a)): REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
(b) for HFO-1234yf (R1234yf):
Click here
3. REMOVE V-RIBBED BELT
Click here
4. REMOVE INLET AIR CLEANER ASSEMBLY
Click here
5. REMOVE SECURITY HORN ASSEMBLY (w/ Security Horn)
Click here
6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
|
(a) Remove the bolt and disconnect the suction hose sub-assembly. NOTICE: Do not apply excessive force to the suction hose sub-assembly. |
|
(b) Remove the O-ring from the suction hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
|
(a) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose. NOTICE: Do not apply excessive force to the No. 1 cooler refrigerant discharge hose. |
|
(b) Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY
|
(a) Disconnect the connector. |
|
(b) for Type A:
|
(1) Remove the 2 nuts. |
|
(2) Using an E8 "TORX" socket wrench, remove the 2 stud bolts, 2 bolts and compressor assembly with pulley.
|
Bolt |
|
Stud Bolt |
(c) for Type B:
|
(1) Remove the 4 bolts and compressor assembly with pulley. |
|
|
|