Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001EXIO |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 02/2019] |
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (w/o Vacuum Brake Booster): C1245; Deceleration Sensor; 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019] |
DTC
|
C1245
|
Deceleration Sensor
|
DESCRIPTION
The parking brake ECU assembly receives vehicle tilt information from the deceleration sensor (airbag ECU assembly) via CAN communication.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Memory
|
Note
|
C1245
|
Deceleration Sensor
|
One of the following conditions is met:
-
An error signal is sent from the deceleration sensor (airbag ECU assembly) for approx. 0.3 seconds.
-
Vehicle speed between 30 km/h (19 mph) or more until just before the vehicle stops (exceeds 0 km/h (0 mph) but less than 1 km/h (1 mph)) and the difference between the maximum and minimum value of the G sensor is less than 0.288 m/s2 and the malfunction repeats 16 times.
-
The power switch is on (IG), the difference between the output values for G sensor 1 and 2 is 5.884 m/s2 or more for 60 seconds.
|
Deceleration sensor (airbag ECU assembly)
|
Yes
|
An electric parking brake system malfunction is displayed on the multi-information display.
|
DTC Detection Condition Combination Table: C1245
|
Vehicle Condition
|
Pattern 1
|
Pattern 2
|
Pattern 3
|
Diagnosis Condition
|
Power switch on (IG)
|
○
|
-
|
○
|
From when the vehicle speed is 30 km/h (19 mph) or more until just before the vehicle stops (exceeds 0 km/h (0 mph), but below 1 km/h (1 mph))
|
-
|
○
|
-
|
Malfunction Status
|
Malfunction signal input from deceleration sensor (airbag ECU assembly)
|
○
|
-
|
-
|
The difference between the maximum and minimum value of the deceleration sensor is less than 0.288 m/s2
|
-
|
○
|
-
|
The difference between the output values for deceleration sensor 1 and 2 is 5.884 m/s2 or more
|
-
|
-
|
○
|
Detection Time
|
Approximately 0.3 seconds
|
Repeats 16 times
|
60 seconds
|
Trip Count
|
1 trip
|
1 trip
|
1 trip
|
HINT:
If the conditions match either of these patterns, a DTC will be output.
CAUTION / NOTICE / HINT
NOTICE:
When replacing the airbag ECU assembly, perform calibration, initialization or registration.
Click here
PROCEDURE
1.
|
CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster))
|
(a) Check for DTC.
Click here
Chassis > ABS/VSC/TRAC > Trouble Codes
DTC is not output
|
|
|
2.
|
CHECK DTC (ELECTRIC PARKING BRAKE SYSTEM (w/o Vacuum Brake Booster))
|
(a) Clear the DTC.
Click here
Chassis > Electric Parking Brake > Clear DTCs
(b) Turn the power switch off.
(c) Check for DTC.
Click here
Chassis > Electric Parking Brake > Trouble Codes
|