Last Modified: 05-08-2025 6.11:8.1.0 Doc ID: RM100000001EWIF
Model Year Start: 2019 Model: RAV4 HV Prod Date Range: [11/2018 - 08/2020]
Title: MAINTENANCE: A25A-FXS AUXILIARY BATTERY: INSTALLATION; 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]

INSTALLATION

PROCEDURE

1. INSTALL AUXILIARY BATTERY

(a) w/ No. 1 Battery Spacer:

Install the No. 1 battery spacer.

(b) Install the auxiliary battery.

(c) Install the battery insulator.

(d) Install the battery clamp sub-assembly with the bolt and nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

(e) Connect the battery hose to the auxiliary battery.

(f) Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

(g) Close the connector cover.

2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

(a) Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY RAV4 RAV4 HV [10/2019 - 06/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY RAV4 RAV4 HV [06/2020 - 08/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

3. INSTALL BATTERY HOLE COVER

(a) Attach the 12 claws and install the battery hole cover.

4. INSTALL REAR NO. 2 FLOOR BOARD

(a) Attach the 2 clips and 2 guides and install the luggage trim service hole cover.

5. INSTALL DECK BOARD ASSEMBLY

(a) Install the deck board assembly.