| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EVA3 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 08/2020] |
| Title: A25A-FKS (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2019 - 2020 MY RAV4 [11/2018 - 08/2020] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
-
w/ Canister Pump Module:
Click here
![2019 MY RAV4 [11/2018 - 10/2019]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM (w/ Canister Pump Module): INITIALIZATION](/t3Portal/stylegraphics/info.gif)
-
w/o Canister Pump Module:
Click here
PROCEDURE
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
-
w/ Canister Pump Module:
Click here
-
w/o Canister Pump Module:
Click here
(a) Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
(b) Install the engine coolant temperature sensor to the water outlet with a new clip.
NOTICE:
- If the engine coolant temperature sensor has been struck or dropped, replace it.
- If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL BATTERY
Click here
3. INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/ Grille Shutter)
(a) Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.
(b) Install the No. 2 engine coolant temperature sensor to the water outlet with a new clip.
NOTICE:
- If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
- If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.
(c) Connect the No. 2 engine coolant temperature sensor connector.
4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (w/ Grille Shutter)
Click here
5. INSTALL INLET AIR CLEANER ASSEMBLY (w/ Grille Shutter)
Click here
6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Grille Shutter)
Click here
7. ADD ENGINE COOLANT
Click here
8. INSPECT FOR COOLANT LEAK
Click here
|
|