- Poor idle, etc.
- Engine start function, etc.
| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EVA2 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 08/2020] |
| Title: A25A-FKS (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL; 2019 - 2020 MY RAV4 [11/2018 - 08/2020] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during engine coolant temperature sensor removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Replacement of engine coolant temperature sensor |
Inspection after repair |
|
w/ Canister Pump Module:
w/o Canister Pump Module:
|
PROCEDURE
1. DRAIN ENGINE COOLANT
Click here
![2019 - 2024 MY RAV4 [11/2018 - ]; MAINTENANCE: A25A-FKS COOLANT: REPLACEMENT](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Grille Shutter)
Click here
3. REMOVE INLET AIR CLEANER ASSEMBLY (w/ Grille Shutter)
Click here
4. REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE (w/ Grille Shutter)
Click here
5. REMOVE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/ Grille Shutter)
|
(a) Disconnect the No. 2 engine coolant temperature sensor connector. |
|
|
(b) Remove the clip and No. 2 engine coolant temperature sensor from the water outlet. NOTICE: If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it. |
|
6. REMOVE BATTERY
Click here
7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
|
(a) Disconnect the engine coolant temperature sensor connector. |
|
|
(b) Remove the clip and engine coolant temperature sensor from the water outlet. NOTICE: If the engine coolant temperature sensor has been struck or dropped, replace it. |
|
|
|