| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EV7B |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: LIGHTING (INT): REAR DOOR COURTESY SWITCH: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR SEAT CUSHION LOCK HOOK
Click here
3. REMOVE REAR SEATBACK ASSEMBLY LH
Click here
4. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR) (for RH Side)
Click here
5. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)
Click here
6. REMOVE REAR DOOR SCUFF PLATE LH
Click here
7. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
Click here
8. REMOVE NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)
Click here
9. REMOVE NO. 2 BATTERY SERVICE COVER BOARD (for HV Model , RH Side)
Click here
10. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
Click here
11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Pull back the rear door opening trim weatherstrip LH so that the rear seat side garnish LH can be removed.
Click here
12. REMOVE REAR SEAT SIDE GARNISH LH
Click here
13. REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction |
|
"TORX" Screw |
|
Connector |
(b) Using T30 "TORX" socket wrench, remove the "TORX" screw and rear door courtesy light switch assembly.
|
|