| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001ES5A |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 10/2022] |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: C1610; Camera ECU Malfunction; 2019 - 2022 MY RAV4 RAV4 HV [11/2018 - 10/2022] | ||
|
DTC |
C1610 |
Camera ECU Malfunction |
DESCRIPTION
This DTC is stored when a malfunction occurs in the parking assist monitor system*1 or panoramic view monitor system*2.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1610 |
Camera ECU Malfunction |
|
|
-
*1: w/ Parking Assist Monitor System
*2: w/ Panoramic View Monitor System
CAUTION / NOTICE / HINT
NOTICE:
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
HINT:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 10/2019]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK MODEL |
(a) Choose the model to be inspected.
|
Result |
Proceed to |
|---|---|
|
w/ Parking Assist Monitor System |
A |
|
w/ Panoramic View Monitor System |
B |
| B |
|
|
|
2. |
CHECK DTC (PARKING ASSIST MONITOR SYSTEM) |
(a) Clear the DTCs.
Click here
Chassis > Rear Camera > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Chassis > Rear Camera > Trouble Codes
OK:
No DTCs are output.
| NG |
|
|
|
3. |
CHECK DTC (AUDIO AND VISUAL SYSTEM) |
(a) Clear the DTCs.
Click here
Body Electrical > Navigation System > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
| OK |
|
END |
| NG |
|
|
4. |
CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM) |
(a) Clear the DTCs.
for Gasoline Model: Click here
for HV Model: Click here
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
for Gasoline Model: Click here
for HV Model: Click here
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK:
No DTCs are output.
| NG |
|
GO TO PANORAMIC VIEW MONITOR SYSTEM for HV model: Click here
for Gasoline model: Click here
|
|
|
5. |
CHECK DTC (AUDIO AND VISUAL SYSTEM) |
(a) Clear the DTCs.
Click here
Body Electrical > Navigation System > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
| OK |
|
END |
| NG |
|
|
|