Last Modified: 09-02-2025 6.11:8.1.0 Doc ID: RM100000001EPG7
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

PROCEDURE

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Inspect the hazard warning signal switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition
If the result is not as specified, replace the hazard warning signal switch assembly.

5 (TB) - 2 (E)

Hazard warning signal switch off

10 kΩ or higher

Hazard warning signal switch on

Below 1 Ω

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)

(b) Check the illumination.

(1) Apply auxiliary battery voltage to the connector and check the illumination conditions.

OK:

Auxiliary Battery Connection

Specified Condition
If the result is not as specified, replace the hazard warning signal switch assembly.

Auxiliary battery positive (+) → 6 (ILL+)

Auxiliary battery negative (-) → 1 (ILL-)

Illuminates

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)