Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001EPG7
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Inspect the hazard warning signal switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition
If the result is not as specified, replace the hazard warning signal switch assembly.

5 (TB) - 2 (E)

Hazard warning signal switch off

10 kΩ or higher

Hazard warning signal switch on

Below 1 Ω

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)

(b) Check the illumination.

(1) Apply auxiliary battery voltage to the connector and check the illumination conditions.

OK:

Auxiliary Battery Connection

Specified Condition
If the result is not as specified, replace the hazard warning signal switch assembly.

Auxiliary battery positive (+) → 6 (ILL+)

Auxiliary battery negative (-) → 1 (ILL-)

Illuminates

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)